Honeywell HD273H User Manual page 37

37
Steps:
1. Set the STATUS as ON to enable the masking area.
2. Move the cursor to HORIZON SIZE and move the joystick
left/right to define the horizontal size of the selected
masking area.
3. Move the cursor to VERTICAL SIZE and move the joystick
left/right to define the vertical size of the selected masking
area.
4. Move the cursor to HORIZON MOVE and move the joystick
left/right to define the horizontal position of the selected
masking area.
5. Move the cursor to VERTICAL MOVE and move the
joystick left/right to define the vertical position of the
selected masking area.
HD273H(X) Minidome Camera User Guide
1. STATUS
2. HORIZON SIZE
3. VERTICAL SIZE
4. HORIZON MOVE
5. VERTICAL MOVE
6. RETURN
Figure 1-28 Setting a Masking Area
AREA
OFF
0

0
0
0

800-18606 – A – 06/2014