Fuse Replacement - Mercury 200 User Manual

Improper fasteners or improper installation procedures can result
in loosening or disengagement of the steering link rod. This can
cause a sudden, unexpected loss of boat control, resulting in
serious injury or death due to occupants being thrown within or
out of the boat. Always use required components and follow
instructions and torque procedures.
d
a - Special washer head bolt (10‑849838)
b - Flat washer (2)
c - Nylon insert locknut (11‑826709113)
d - Nylon insert locknut (11‑826709113)
Description
Special washer head bolt
Nylon insert locknut "d"
Nylon insert locknut "c"
Assemble steering link rod to steering cable with two flat washers
and self‑locking nylon insert locknut. Tighten locknut until it seats,
then back nut off 1/4 turn.
Assemble steering link rod to engine with special washer head bolt
and self‑locking nylon insert locknut. First torque bolt, then torque
locknut to specifications.

Fuse Replacement

IMPORTANT: Always carry spare 5 and 20 AMP fuses.
MAINTENANCE
WARNING
!
a
Nm
27
27
Tighten until seats, then back off 1/4 turn
62
b
c
27843
lb. in. lb. ft.
20
20