Recording
The picture cannot be recorded.
•
Is there any memory remaining on the built-in memory or the card?
> Delete the pictures which are not necessary to increase available space in the memory.
•
You may not be able to record for a short while after turning this unit on when using a large capacity
card.
The recorded picture is whitish.
•
The picture can become whitish if there is dirt, e.g. fingerprints on the lens.
> If the lens is dirty, turn on the camera, eject the lens barrel and gently wipe the lens surface with
a soft, dry cloth.
The recorded picture is too bright or dark.
•
Check that the exposure is correctly compensated.
•
Setting the [Min. Shtr Speed] to faster speed might make the picture darker.
> Set the [Min. Shtr Speed]
Multiple pictures are taken at one time.
•
Set [Auto Bracket]
(P55)
The subject is not focused properly.
•
The focus range varies depending on the Recording Mode.
> Set to the proper mode for the distance to the subject.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
The recorded picture is blurred.
The Optical Image Stabilizer is not effective.
•
The shutter speed becomes slower when pictures are taken in dark places so hold the camera firmly
with both hands to take the pictures.
•
When taking pictures at a slow shutter speed, use the Self-timer.
Taking pictures using Auto Bracket is not possible.
•
Is there any memory remaining on the built-in memory or the card?
(P76)
to slower speed.
or [Burst]
(P78)
of the [Rec] menu to [OFF].
(P22)
- 119 -
Others
(P54)
(P29)
(P22)
(P53)
(P36)