Chinese Input - Sony Ericsson T700 User Manual

To enter full stops and commas
• When you enter text, press
To enter a symbol
1 When you enter text, select
Add symbol.
2 Scroll to a symbol and select Insert.
To enter text using T9™ Text Input
1 From standby select, for example,
Menu > Messaging
message.
2 If is not displayed, press and hold
down to change to T9 Text Input.
3 Press each key only once, even if the
letter you want is not the first letter on
the key. For example, to write the word
"Jane", press
Write the whole word before looking at
the suggestions.
4 Use or to view suggestions.
5 Press to accept a suggestion.
To enter text using multitap
1 From standby select, for example,
Menu > Messaging
message.
2 If is displayed, press and hold down
to change to multitap text input.
3 Press –
desired letter appears.
4 When a word is written, press
add a space.
16 Getting started
This is the Internet version of the User guide. © Print only for private use.
.
Options >
> Write new > Text
, , ,
> Write new > Text
repeatedly until the
to
Multitap input only applies when Latin
characters are selected as writing
language.
To add words to the built-in dictionary
1 When you enter text using T9 Text Input,
select Options
2 Write the word using multitap input and
select Insert.

Chinese input

This mobile phone has different input
methods for entering Chinese
characters:
• Stroke input
• Pinyin input
.
You can use these methods, for
example, to enter Chinese names
and Chinese short messages.
Input method may be different when
Simplified Chinese has been selected
as the phone language.
Switching between Chinese input
methods
In the Chinese editing mode, you can
select and switch quickly to another
input method by pressing and holding
.
> Spell word.