Lightolier Indoor Lighting CD12-1 Specifications

2
2
3
5
Complete ordering instructions on back.
Features
1. Housing: Die-formed steel, slotted for air return. Integral flanges at each end
strengthen the housing and permit housings to be bolted together in continuous
runs and facilitate suspension of fixture. Concealed openings for heat extraction
and air return.
2. Lamping: One or two T8 or T12 fluorescent lamps, as specified. Provided by
others.
3. Reflector: Die-formed prepainted white.
4. Louver: Semi-specular anodized aluminum, 40° lengthwise by 30° minimum
crosswise shielding. Supported along both edges by concealed frame of
extruded aluminum. Bold baffle, prismatic lens, gold anodized louver, open or
egg crate louver available, consult factory.
5. Ceiling Trim: Extruded aluminum alloy with integral aligner splines and con-
toured for brightness control.
6. Electrical Chassis: Mounted into housing and secured by brackets and steel
spring clips. Grounding and locking latches join chassis in continuous runs.
Fluorescent lamps overlap 3" (7.62cm) to eliminate shadows.
Example of Pattern Run
6' 9" (205.74cm)
12" (30.48cm)
33"
Telescoping
Unit
12" (30.48cm)
9-3/16" (23.34cm)
1
4
.
. . .
. .
.
. .
. . .
. .
. .
. .
Sample Runs
12" (30.48cm)
6' 6"
(198.12cm)
21"
5' 8" (172.72cm)

Lighting Systems

8-1/4"
(20.96cm)
Electrical
Specify 120 volt or 277 volt. 3 conductor, 18 gauge wire. Color-coded quick
connectors allow ease of connection for joiner modules. For special circuiting,
consult factory. Rapid start, HPF, class "P" thermally protected. PowerSpec HDF
dimming ballast is available.
Mountings
Electrical housing is mounted without the removal of any screws, nuts or hardware.
Housing is suspended by hanger wires.
Finish
Ceiling trim painted baked enamel semi-gloss white.
Options and Accessories
90 degree universal corner.
Labels
UL, cUL and I.B.E.W.
Example of Straight Run
21' 10" (665.48cm)
45"
90"
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
We reserve the right to change details of design, materials and finish.
CD12-1
Quarter Scale
90"
Telescoping
Unit
Type: