JVC FS-P550 Instructions For Use Manual page 36

Compact component system
Hide thumbs Also See for FS-P550:
Table of Contents

Advertisement

PICTURE SOURCE
You can obtain optimal picture quality by selecting an
appropriate option—picture source type (either video source
or film source).
Select one of the following:
AUTO: Normally select this.
When playing back a disc containing both video
and film sources, the System automatically
changes the processing to match it to the picture
type (film or video source) of the current chapter.
FILM:
To play a film source disc.
VIDEO: To play a video source disc.
SCREEN SAVER
You can activate or deactivate screen saver while operating
the built-in disc player.
Select one of the following:
ON:
The pictures on the TV becomes dark when no
operation is done for about 5 minutes.
OFF:
To cancel the screen saver.
FILE TYPE
If both audio tracks (MP3 or WMA files) and still picture
(JPEG files) are recorded on a disc, you can select which to
play.
Select one of the following:
AUDIO:
To play MP3/WMA files.
STILL PICTURE:
To play JPEG files.
32
AUDIO Setup Menu
You can adjust the sound settings of the System.
AUDIO
DIGITAL AUDIO OUTPUT
DOWN MIX
D. RANGE COMPRESSION
SELECT
USE
TO EXIT, PRESS [SET UP].
ENTER
DIGITAL AUDIO OUTPUT
When using the digital output terminal on the rear, set this
correctly according to the connected component.
Select one of the following:
PCM ONLY:
To connect to a linear PCM digital
equipment such as an MD recorder.
DOLBY DIGITAL
To connect to a Dolby Digital decoder
/PCM:
or an amplifier with a built-in Dolby
Digital decoder.
STREAM/PCM:
To connect to a DTS decoder or an
amplifier with a built-in DTS decoder.
• See also "DVD OPTICAL DIGITAL OUT Signals" on
page 38.
DOWN MIX
When playing a multi-channel DVD, the System converts
the signals into 2 channels.
Downmix setting is effective for the speaker output (and
digital audio output if "DIGITAL AUDIO OUTPUT" is set
to "PCM ONLY") from this System.
Select one of the following:
DOLBY
To connect an amplifier with the Dolby
SURROUND:
Pro Logic decoder.
STEREO:
To connect a conventional stereo
amplifier, receiver, MD player, TV, etc.
STREAM/PCM
DOLBY SURROUND
AUTO
TO SELECT. USE ENTER TO CONFIRM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents