Restart Device - Netopia Cayman 3346-ENT Quick Start Manual

3. Configure the Netopia Cayman
D/ The IP Easy Setup screen appears. Configure your LAN parameters here.
The example below is based on IP Easy Set Up using NAT and DHCP Server.
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name Server:
Secondary Domain Name Server:
Default IP Gateway:
IP Address Serving:
Number of Client IP Addresses:
1st Client Adress:
PREVIOUS SCREEN
Enter an IP address in decimal and dot form (xxx. xxx. xxx. xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.
The Domain Name and the IP addresses of your Primary and Secondary Domain
Name Server are dynamically acquired by the router when connecting to the
Internet. However, we recommend that you enter manually these information as
supplied by your ISP. The other parameters allow you to change, if necessary, the
default settings and the DHCP Server features of your Cayman Router.
E/ The Easy Setup Security Configuration screen appears.
It is strongly suggested that you password-protect configuration
access to your Netopia. By entering a Name and Password pair here,
access via serial, Telnet and Web server will be password protected.
Be sure to remember what you have typed here, because you will be
prompted for it each time you configure this Netopia.
Write Access Name:
Write Access Password:
PREVIOUS SCREEN
Configure a Configuration Access Name and Password here.
Enter a Name and Password to limit access to the Router's configuration screens.
Be sure to remember what you have typed because you will be prompted for it each
time you configure your Router. Select RESTART DEVICE and press Return.
2. The Cayman Router will then restart and your settings will take effect.
Congratulations! Your installation is complete. You can now surf to your favourite
Web sites. If you have any questions or encounter problems, refer to the detailed
documentation on the Netopia CD, or contact our technical support. Answers to
many frequently asked product-related questions are also available on-line at:
http://www. netopia.com/support
8
IP Easy Setup
Easy Setup Security Configuration
TO MAIN MENU
192.168.1.1
255.255.255.0
______
0.0.0.0
0.0.0.0
127.0.0.2
On
100
192.168.1.100
NEXT SCREEN

RESTART DEVICE

(continued)
Make any
changes
required.
The default IP
gateway must
match the
Remote IP add-
ress value that
you set on the
Connection
Profile screen
Select NEXT
SCREEN and
press Return.