The remote configuration connection is usually started
by the server when the device settings need to be
updated.
To create a new server profile, select
server
profile.
You may receive these settings from your service
provider in a configuration message. If not, define the
following:
Server name
— Enter a name for the configuration
•
server.
Server ID
— Enter the unique ID to identify the
•
configuration server.
Server password
— Enter a password to identify
•
your device to the server.
Session mode
— Select the preferred connection
•
type.
Access point
— Select the access point to use for
•
the connection, or create a new access point. You
can also choose to be asked for the access point
every time you start a connection.
Host address
— Enter the web address of the
•
configuration server.
Port
— Enter the port number of the server.
•
User name
— Enter your user ID for the
•
configuration server.
Password
— Enter your password for the
•
configuration server.
Allow configuration
•
server to initiate a configuration session.
Options
New
>
— Select
Yes
to allow the
Security and data management
Auto-accept all requests
•
not want the server to ask for your confirmation
when it initiates a configuration session.
Network authentication
•
http authentication. This setting is available only if
you have selected internet as the bearer type.
Network user name
— Enter your user ID for the
•
http authentication. This setting is available only if
you have selected internet as the bearer type.
Network password
— Enter your password for the
•
http authentication. This setting is available only if
you have selected internet as the bearer type.
To connect to the server and receive configuration
settings for your device, select
configuration.
To view the configuration log of the selected profile,
select
Options
View
log.
>
Application manager
Select
Menu
Installations
>
You can install two types of applications and software
on your device:
• Applications and software specifically intended for
your device or compatible with the Symbian
operating system. These software installation files
have the extension .sis or .sisx.
— Select
Yes
if you do
— Select whether to use
Options
Start
>
App.
mgr..
>
127