Lightolier Covelite CL-3 Specification Sheet

3 1/8"
(7.94cm)
Ordering Information
Style Lamps
CL 1
1 = 1-Lamp Biax
Features
1. Housing: Die-formed 20 gauge pre-painted steel. Low profile 3-1/8" (7.94cm)
in height and 8" (20.32cm) in width.
2. Lamping: High output twin tube T5. By others.
3. Reflector: Constructed of precision die-formed specular aluminum lighting
sheet. Reflector is covered with a scratch resistant protective coating to pre-
vent damage during installation.
2
8" (20.32cm)
Length Ballast & Voltage
2 = 2-Foot (1-40W) BX = Electronic Biax 39W or 40W 120V
3 = 3-Foot (2-39W) BX2 = Electronic Biax 39W or 40W 277V
4 = 4-Foot (2-40W) HDBX = PowerSpec
6 = 6-Foot (4-39W) HDBX2 = PowerSpec
8 = 8-Foot (4-40W)
Electrical
Specify 120V or 277V. 3 conductor, 18 gauge wire. Color-coded quick connectors
allow ease of connection for joiner modules. For special circuiting, consult factory.
Rapid start, HPF, class "P" thermally protected. PowerSpec HDF dimming ballast is
available. Factory installed ballast disconnect allows the ballast to be disconnected
from and reconnected to incoming power under load without turning the entire
circuit off.
Labels
UL, cUL and I.B.E.W.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
We reserve the right to change details of design, materials and finish.

Lighting Systems

Covelite™
3
Half Scale
® HDF Dimming Biax 120V
® HDF Dimming Biax 277V
Type:
CL-3
1