Caring For Your Monitor - Lenovo ThinkVision L193p User Manual

Caring for your monitor

Downloaded from ManualMonitor.com Manuals
For optimal performance, switch off your monitor at the end of each working day, or
whenever you expect to leave it unused for long periods during the day.
Table 2-4. Power indicator
State Power Indicator
On Steady green
Standby/Suspend Steady amber
Off Off
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
· Apply water or liquid directly to your monitor.
· Use solvents or abrasives.
· Use flammable cleaning materials to clean your monitor or any other electrical
equipment.
· Touch the screen area of your monitor with sharp or abrasive items. This type of
contact may cause permanent damage to your screen.
· Use any cleaner which contains an anti-static solution or similar additives. This
may harm the coating of the screen area.
Do:
· Lightly dampen a soft cloth with water and use this to gently wipe the covers and
the screen.
· Remove grease or finger marks with a damp cloth and a little mild detergent.
Screen Restoring Operation
Normal
Blank Press a key or move the
mouse
There may be a slight
delay before the image
reappears.
Note: Standby also
occurs if there is no image
output to the monitor.
Blank Press a key or move the
mouse
There may be a slight
delay before the image
reappears.
Chapter 2. Adjusting and using your monitor
Compliance
ENERGY STAR
ENERGY STAR
2-8