Nokia 5250 RM-684 Service Manual page 18

31. Open the A-COVER ASSY connector with the SS-93 as
shown if it still connects. Be careful not to damage the
connector – or any nearby components and flex!
33. The upper and lower modules can now be
separated.
35. Continue to release the remaining clips by inserting
the flat-head screwdriver into the gaps as shown
above. Be careful not to damage the structure of the
housings.
18 Confidential．Copyright © 2011 NOKIA．All rights reserved
Service Manual Level 1&2
32. Open the LCM connector with the SS-93 as shown.
Be careful not to damage the connector – or any nearby
components and flex!
34. Release the clip between LCM METAL FRAME and
A-COVER ASSY by inserting the flat-head screwdriver into
the gap near it. Be careful not to damage the structure
of the housings.
36. Lift up the bottom side of the LCM METAL FRAME and
remove it to the direction shown above.
Nokia 5250 RM-684
Version 3.0