NEC Electra Elite IPK General Description Manual page 64

Document Revision 4
___________________________________________________________________________________
A-23
A-24
A-25
A-26
A-27
___________________________________________________________________________________
2 - 10
A U T O M A T I C N U M B E R I N D I C A T I O N O N T 1
T1 ANI displays the calling party telephone number on the LCD of the
Multiline Terminal for incoming trunk calls. ANI information follows the call to
where it is transferred.
Historically ANI has been a feature of long-distance carriers typically
provided on T1 circuits. The Electra Elite IPK system supports ANI on
T1-FGD (Feature Group D) trunks. This feature is functionally the same as
Caller ID.
With R1700 or higher, and with the MIFM-U10 ETU with KMM(1.0)U
installed or MIFM-U20 ETU with KMM-U20 installed (R3000 or higher),
Caller ID information can be displayed for the last 50 incoming calls using
the Directory key or a Caller ID Scroll key when it is assigned.
A U T O M A T I C R E D I A L
Automatic Redial simplifies repetitive dialing to a busy or unanswered
outgoing call. After a busy tone or no answer is received during a CO/PBX
call, the system periodically redials the party number while the station user
monitors the call for completion.
A U T O M A T I C R E L E A S E
Automatic Release drops the line circuit when an outside party abandons the
call. For this feature to work with Loop Start Trunks, the CO/PBX providing
the outside line must provide a timed disconnect signal. Automatic release is
normally provided on Ground Start, DID, ISDN, and Tie Line Trunks.
A U T O M A T I C R O U T E S E L E C T I O N
Automatic Route Selection (ARS) allows an outgoing line to be seized using
a Trunk Group or Route Advance Block (RAB) for each number dialed by the
user. The ARS feature allows more efficient use of the trunks connected to
the system.
A U T O M A T I C T R U N K - T O - T R U N K T R A N S F E R
Automatic Trunk-to-Trunk Transfer allows an incoming CO/PBX call to be
automatically dialed out of the system over another outside line to a
programmed telephone number. This is especially useful for forwarding calls
to an answering service during nonbusiness hours (i.e., nights, weekends, or
holidays).
Electra Elite IPK
Features