Page 1
OPERATION AND PARTS MANUAL MODEL SFG10E ELECTRIC SURFACE GRINDER Revision #2 (05/28/09) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
All orders are treated as Standard Orders and will ship the same day if received prior to 3PM PST. WE ACCEPT ALL MAJOR CREDIT CARDS! SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 4...
Refer to OSHA 2207 and/or applicable updated revisions which contains all OSHA job safety and health rules and regulations (1926 and 1910) covering construction. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 5...
Page 6
Multiquip, Inc. reserves the right to make changes in design, products, specifications, pictures and descriptions contained engineering or specifications and to add improvements or in this publication. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 6...
_____________ Date _________________ Operator ____________________ Owner/Instructor _____________ Date NOTE: INSERT COPIES OF THIS PAGE WITHIN THE OPERATOR’S MANUAL IF SPACE FOR ADDITIONAL OPERATORS IS REQUIRED. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 7...
COMPLETELY COMPREHENDS THE CONTENTS OF regular users should closely monitor the condition of THIS MANUAL. their hands and fingers. After each period of use, SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 8...
Page 9
BEFORE sections of this manual for more detailed information utilization. The SURFACE GRINDER and related accessories are not insulated. Contact with buried SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 9...
Page 10
Work carefully. Always hold the operator handle firmly with both hands. Wrap your fingers around the handle, keeping it cradled between your thumbs SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 10...
8) Consult the material supplied by the electric motor manufacturer for specific information relative to proper operational, lubrication and storage requirements. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 11...
SFSG121000 Safety and Dust Shield Assembly Kit. The SFSG121000 Safety and Dust Shield is designed to perform the following job functions: SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 12...
Page 13
40 to 75 hours. service life over other manufacturing processes. As the clay material wears away, it exposes new, sharp, edges of SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 13...
Page 14
FIGURE 7. against the substantially higher costs of the tungsten carbide SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 14...
Page 15
The flail can still be used in service. It will just wear a little faster and more uneven in SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 15...
Page 16
When a bushing can no longer supply adequate force against the flails, it will break, allowing the flails to be hurdled SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 16...
Page 17
FIGURE 13 Units are secured to the machine with plastic wedges. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 17...
Page 18
4 edges. Many materials such as adhesives, rubber deposits and mastics have the tendency to extrude or smear rather than SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 18...
Page 19
FIGURE 22 SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 19...
Page 20
The angled side of the mounting wedge contacts the rib of the disc. FIGURE 26. An improper mounting configuration is depicted in FIGURE 27. FIGURE 24 SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 20...
Page 21
ANY MULTI-ACCESSORY ATTACHMENT, DETERMINE PROPERTY DAMAGE AND/OR PERSONAL INJURY. THAT NO PORTION OF THE ATTACHMENT AND/OR MOUNTING WEDGE EXTENDS BEYOND THE NORMAL PERIMETER OF THE ALUMINUM DISC. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 21...
Page 22
Proper removal techniques by both methods will result in minimal damage to the aluminum disc. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 22...
Page 23
Additional electrical products already utilizing the same circuit will reduce the available amperage, resulting in starting and operational difficulties. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 23...
Page 24
NEMA 6-20P plug provided on the SURFACE GRINDER. FIGURE 33. FIGURE 34 FIGURE 33 SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 24...
Page 25
UNIQUE OPERATING CHARACTERISTICS OF THE SURFACE GRINDER, THERE IS NO PROVISION FOR THE ELECTRIC MOTOR TO AUTOMATICALLY STOP IF THE OPERATOR FAILS TO MAINTAIN PROPER CONTROL. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 25...
Page 26
TROL, PROPERTY DAMAGE AND/OR PERSONAL INJURY. THIS PROCEDURE IS ESPECIALLY IMPOR- TANT WHEN OPERATING THE SURFACE GRINDER ON FLOORS AND/OR SURFACES ABOVE GROUND LEVEL. FIGURE 38 SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 26...
Page 27
It is highly recommended that both the interior and exterior surfaces be properly cleaned after the completion of each usage. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 27...
Page 28
Very few, if any, floors are specifically designed to be unflat. Unfortunately, many turn out that way. Flatness and levelness are both desirable, SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 28...
Page 29
F numbers provide the most complete and consistent testing on random traffic floors. system. For defined traffic floors, the TR34 system is superior. d) The system is infinitely variable. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 29...
Page 30
Dry diamond more or less than 5 nominal feet segmented discs and blocks can be utilized to remove surface imperfections. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 30...
Step 5. If tension is not within SION CORD. IMPROPER PROCEDURES CAN specifications, refer to INSTALLING A REPLACEMENT RESULT IN PROPERTY DAMAGE AND/OR PER- V-BELT for specific information. SONAL INJURY. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 31...
Page 32
FIGURE 43. DANGER DANGER DANGER DANGER DANGER UNEXPECTED MACHINE START UP CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. FIGURE 42 FIGURE 43 SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 32...
Page 33
1 each, arbor press of sufficient capacity and stability. Parts Required: Elastomeric Mount, P/N SFJ62502 (as required). 1 container each: Installation Lubricant (or approved equivalent). SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 33...
Page 34
FIGURE 50 FIGURE 51. LUBRICATION POINTS SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 34...
Page 35
The seals utilized with the motor are intended to deliver a longer service life in a concrete dust environment. When replacing the seals, utilize only components meeting the original factory specifications. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 35...
See MULTI ACCESSORY Incorrect installation of the attachment in the aluminum disc. ATTACHMENTS AND APPLICATIONS. See INSTALLING A MULTI-ACCESSORY ATTACHMENT ON THE ROTATING DISC. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 36...
4) Store the SURFACE GRINDER inside. If the SURFACE GRINDER must be stored outside, protect it with a suitable covering. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 37...
BASIC WEIGHT .............. 235 lbs (107 kg) SFG10E ELECTRIC MOTOR, 1.5 hp, 1725 RPM, 13.7 amperes @ 115 VAC, 60 Hz. The electric motor requires a clean (no other electric products on the same circuit) 20 ampere capacity circuit to properly function on 115 VAC, 60 Hz.
Page 39
NOTE PAGE SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 39...
Multiquip. Other entries will for sale through Multiquip. be clarifi ed in the “Remarks” Column. SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 40...
3) THIS MACHINE IS DESIGNED TO BE PULLED TOWARD THE OPERATOR DURING NORMAL OPERATION. IMPROPER STARTING/OPERATION PROCEDURES CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. CS8-5050 SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 58...