GE JVM3660 Owner's Manual page 35

Replacing the light bulbs.
Remove screws
Cooktop Light/Night Light
Replace the burned-out bulb with a 10-watt halogen
bulb (WB36X10163), available from your GE supplier.
1
To replace the bulb(s), first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.
2
Remove the screw at the outside edge of the
light cover and push on the inside edge of the
cover to open.
3
Be sure the bulb(s) to be replaced are cool
before removing. After breaking the adhesive
seal, remove the bulb by gently turning.
4
Replace the screw. Connect electrical power
to the oven.
www.GEAppliances.com
35