Bernina Bernette 20 Instruction Manual page 32

Display Explanation & Operating Instructions
Setting a pattern
1. Press the pattern group selection button
once to enter a stitch pattern selection.
2. Use selector wheel to select desired stitch.
3. Press set/disp button to memorize it.
Note:
Other parameters, i.e. stitch length and
stitch width can be changed before or after
memorizing the pattern by pressing the
corresponding button and following point 2
and 3.
Setting an additional function
1. Select the pattern.
2. Press the function button to open the
function program.
3. Use selector wheel to scroll to Twin
Needle or to Mirror function.
4. Press set/disp button to toggle chosen
function.
Note:
Initially both symbols are flashing. When
starting to scroll only the selected function is
flashing.
See Page 62 / 63 for details.
Setting Alphabets
1. Double click the pattern group selection
button to enter Alphabet selection.
2. Press pattern group selection button once
again to start the stitch number flashing.
3. Use selector wheel to select desired stitch.
4. Press set/disp button to memorize it.
31