Bluetooth & Radio; Pairing A Bluetooth Device For The First Time; Playing Audio Wirelessly; Tuning The Fm Radio - iLive ITB124B User Manual

Bluetooth & Radio

Pairing a Bluetooth Device for the First Time

1. Power on the unit by pressing the Power button.
2. Press the Source button on the remote to switch to Bluetooth Mode, indicated by a slowly flashing
indicator on the display.
3. Press the Pair button on the top of the unit.
The pairing indicator will flash quickly. When pairing, remain within 3 feet of the unit.
4. Using the native controls on your Bluetooth device, select the ITB124 in your Bluetooth settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user's manual for your specific device for instructions on pairing and connecting Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the unit and the
flashing and become solid.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or you find it is unable to connect, repeat the above steps.

Playing Audio Wirelessly

1. After pairing to a bluetooth device, use the controls on the remote, the unit, or the native controls on the
connected Bluetooth Device to play, pause or skip a selected track.
2. Audio played through the connected Bluetooth device will now be heard through the speakers.

Tuning the FM Radio

1. Press the Power button to turn the unit on.
2. Press the Source button to switch the unit to FM Radio Mode.
3. Press the Tun-/+ buttons on the unit or the remote to scan for the next available station.
4. Press and hold the Tun-/+ buttons to search for the next available station.

Automatically Programming Memory Presets

1. Press the Source button to enter FM Radio Mode.
2. Press the FM Scan button on the remote.
3. The speaker will scan for all available stations, and store them.
4. Press the Recall button on the remote repeatedly to cycle through your stored stations.

Manually Programming Memory Presets

1. Press the Source button to enter FM Radio Mode and tune to the desired frequency using the Tun -/+
buttons on the remote.
2. Press anywathe Memory button on the remote, then press the Tun -/+ buttons to select a Memory Preset (1
to 20). Press the Memory button again to save the radio frequency to that preset.
3. Press the Recall button on the remote repeatedly to cycle through your stored stations.
10
indicator will stop