Thane Housewares EP2120 User Manual page 8

U S E R ' S G U I D E
• If using the Microfiber Ultra Cloth (Optional item)
Attach the Ultra Cloth to the Mop Head (Part 16) by, following the same
instructions as provided above for the Microfiber Cloth.
Microfiber Ultra Cloth is soft and durable with hundreds of super absorbing
fringes, ideal for your sealed hardwood, ceramic and other types of flooring.
Ultra Cloth care:
• Machine wash 60 ºC (140 ºF)
• Do not bleach
• Do not use softener
NOTE:
Do not operate the H2O Mop ® Ultra ™ without a Mop Pad such as either Microfiber Cloth or Disposable Pad and
Microfiber Ultra Cloth in place.
2) Fill the Water Tank (Part 9)
NOTE: Make sure that the H2O Mop Ultra is unplugged.
® ™
• Using the Measuring Cup:
1) Open the rubber plug.
2) Using the measuring cup (Part 19) fill the Water
Tank (Part 9) until it reaches the MAX line indicated on the tank. Do not overfill.
• Directly from Tap
1) Release the Hand-Held Steamer Body Lock (Part 7) by lifting up
2) Push the Hand-Held Steamer Release button (Part 6) upward
3) Take Hand-held Steamer out by lifting upward and pulling backward.
4) Press the Water Tank Release button down and Pull Water Tank out.
5) Remove the rubber plug and fill the water tank directly from tap. Close the rubber plug and wipe off any
water spills. Block the valve hole on the water tank with a finger so water doesn't drip from the water tank
valve wile filling under tap and moving back to the Hand Held Steamer body.
6) Put the water tank back and make sure that it is firmly positioned in its designated slot.
H20 Mop ® Ultra ™ uses tap water.
However, in areas with hard water, distilled water should be used for better performance.
IMPORTANT:
Make sure the COPPER BALL inside the water tank is always submerged in water while operating the H2O Mop
WARNING:
Never put cleaning detergents or scented products into the H2O Mop
unsafe and damage the unit.
PLEASE READ BEFORE USE
The H2O Mop Ultra is designed to thoroughly clean floor surfaces, such as marble, ceramic, carpet, stone,
® ™
linoleum, sealed hardwood floor and parquet. Not all floors types are suitable for steam cleaning. On surfaces that
have been treated with wax, the wax may be removed by the heat and steam action. Do not use on unsealed flooring
or let unit stand on any wood or heat sensitive floor for an extended period of time. This could cause the wood
grain to rise. When using on vinyl, linoleum or any other heat sensitive floors, use extra caution. Too much heat
can melt down glue in the flooring. When using the appliance on laminated floor, the laminated floor should have
been laid professionally and not have any gaps or cracks in which humidity could enter. Test the H2O Mop
on a small isolated area of your flooring prior to overall use on any floor surface.
Ultra . This will make the operation
® ™
6
U S E R ' S G U I D E
HOW TO USE ACCESSORY TRAY
1) Insert the Accessory Tray tongue (located on the bottom of the Accessory Tray) in the designated slot on the
back of the H2O Mop
2) Push the Accessory Tray against the H2O Mop
tongue
slot
To remove the Accessory Tray:
1) Release the Accessory Tray Lock on the back, top part of the H2O Mop
up the button.
2) Pull the Accessory Tray back to detach .
® Ultra ™ .
® Ultra ™
(OPTIONAL ITEMS)
Ultra Steamer Body.
® ™
® Ultra ™ Steamer Body (Part 8) until it clicks in.
11
® Ultra ™ Steamer Body (Part 8) by lifting