nokia
C
P
ONNECTING
EOPLE
CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany
8. DOME SHEET EXCHANGE
Use SRT-6 to loosen one corner of the Dome Sheet.
Take a new Dome Sheet from carrier film. Do not touch
the keydomes from adhesive side.
Carefully place Engine Module from topside on. Note
the guiding pin.
Carefully press-on the Dome sheet to the Engine
Module to avoid bubbles.
Service Manual 1100/1101 Level 1&2
PAGE 12 (18)
Confidential
Tear off Dome Sheet in diagonal direction to avoid
remains of glue. Check pads for cleanness.
Use the guiding pin and the C-Cover's edge as
reference point.
Before sinking the Engine Module, make sure that it is
also close to the same side of the shielding.
Finally check, if the holes of the Dome Sheet match
exactly to the ones in the Engine Module. Otherwise
change
Dome
functionality.
Copyright 2003-2005 © Nokia Corporation
Approved 2.0
Sheet
again!
Check
MWy
16.06.2005
Keyboard