Operating The Appliance - Dirt Devil Raider upright DDRU User Manual

Operating the appliance

Twist the upper cord wrap to fully
unwrap the cord then plug the unit
into the electrical socket and turn on.
Place foot on the vacuum to recline
the vacuum body as desired.
5
OPERATION
Select a floor height setting by
adjusting the brush bar height.
High – for long pile carpet.
Low – for short pile carpet.
Hard floors – for timber, lino, tiles
and other hard floor surfaces.
Place foot on the on/off button to
switch the vacuum cleaner on.
Dirt Devil Service Line: AU: 1300 361 505
IMPORTANT:
Dirt Devil recommends that
you raise the height of the brush
bar to the hard floor position when
using this cleaner on lino and hard
floors due to constant rotation.
Dirt Devil cannot be held responsible
for damage to these surfaces if the
consumer fails to take notice of this
recommendation.
NZ: 0800 800 900