Wired Network Settings - Samsung SL46B User Manual

7
Network
access the Internet so you do not have to enter them manually. Most home networks are Dynamic
Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must
enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable
Setup Screen when you set up the network connection. To get the IP address, subnet mask,
gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows
computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL
modems that support DHCP also let you use Static IP addresses.

7.1.2 Wired Network Settings

O
m
MENU [
Set the network connection to use Internet services such as perform software upgrades.
Automatic Network Setup
Use the Automatic Network Settings
To set up your product cable network connection automatically, follow these steps.
How to set up automatically
1
Go to the Network Settings
2
Select Wired, press [
3
The network test screen appears and verifies the network connection. When the connection has
been verified, the
If the connection process fails, check the LAN port connection.
If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section,
] Network Network Settings
Network Settings
Select a network connection type.
Wired
Wireless(General)
WPS(PBC)
One Foot Connection
The displayed image may differ depending on the model.
when connecting your product to a network that supports DHCP.
screen.
], and then press [
"Internet is connected
[ ]
ENTER
Connect to the network using Connect to the network using
LAN cable. Please make sure LAN cable. Please make sure
that the LAN cable is that the LAN cable is
connected.
] again.
successfully." message appears.
Manual Network
Previous
Next
Cancel
Setup.
132
7 Network