Technical Information - Panasonic Viera TH-P50X30Z Operating Instructions Manual

Technical Information

Channel Allocation (Analogue TV mode)
CH 1 - CH 11
Rating (Digital TV mode)
Rating
No Block
G
PGR
AO
Stereo / Bilingual Sound Selection (Analogue TV mode)
When you receive the stereo / bilingual sound system, sound output modes can be selected by
pressing the Sound Selection button.
Audio Signal
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of Regular broadcast
broadcast
Mode Indicator No Indicator
A2 (German) .......Used in Australia, Malaysia etc.
Regular broadcast
Type of
broadcast
Mode Indicator No Indicator
•
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic
switching occurs, it is recommended you switch from STEREO to MONO.
•
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
•
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO
position, using the Sound Selection button.
•
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
64
CH Display / Receive Channel
CH 21 - CH 70
STEREO
Regular + NICAM MONO I
(Standard Audio)
BILINGUAL or DUAL MONO:
(Standard Audio)
CH 74 - CH 78
Meaning
Not classified
General
Parental Guidance Recommended
Adults Only
MAIN I
(MAIN I )
MAIN I / SUB II
CH 80 - CH 120
SUB II MONO
NICAM NICAM DUAL MONO
STEREO (MAIN I / SUB II )
I
STEREO
II