: In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information,please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). DAEWOO ELECTRONICS CO., LTD.
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHE AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER...
1. SPECIFICATIONS ITEM DWF-1098 DWF-1068 DWF-1048 DWF-1398 POWER SOURCE AVAILABLE IN ALL LOCAL AC VOLTAGE AND CYCLE POWER 50Hz 490W 500W CONSUMPTION 60Hz 550W MACHINE NON-PUMP 47Kg(GROSS:50Kg) WEIGHT PUMP 49Kg(GROSS:52Kg) DIMENSION(WXHXD) 630X1010X670 630X1030X670 WASHING COURSE FULL AUTOMATIC 6 COURSE (STANDARD/BLANKET/SUIT/ECONOMY/LIGHT/HEAVY)
3. FUNCTIONS OF THE CONTROL PANEL Dwf-1098, 1398 Control panel has micom sensor. As the buttons are pressed, the lamps indicating the selection of your desired washing program will light up. BUBBLE WASHING MACHINE COLD COURSE DETERGENT POWER HIGHT FUZZY LIGHT REM.
Page 6
Dwf-1068, 1048 Control panel has micom sensor. As the buttons are pressed, the lamps indicating the selection of your desired washing program will light up. BUBBLE WASHING MACHINE RINSE COURSE DETERGENT COLD FEED SOCK MIN. FUZZY LIGHT HIGHT POWER WASH SPIN MEDI U M BLANKET...
4. WASHING PROCEDURE AND COURSE SELECTION Full Automatic Course 1. FUZZY COURSE (SENSOR); • This selection is for general washing except extraordinary clothes. • Artificial brain sensor selects properly the various kind of washing condition such as washing time, rinse times, spin time water level and washes well.
5. HEAVY COURSE; • This selection is effective for blue-jean, climbing clothes, ruck sack, sports wear, etc ... • If you want to soak, press the “WASH” button to adjust to “SOAK” after the course selection. adjust to START/ COURSE POWER "HEAVY"...
How to Connect the Inlet Hose Be careful not to mistake in supplying between the hot(maximum : 50˚C) and cold water. In using only one water tap or in case of attached one water inlet valve, connect the inlet hose to the cold water inlet valve.
How To Clean The Filter CLEANING THE LINT FILTER Pull the Filter frame Turn the lint filter Return the filter as it was, and upward. inside out, wash to insert the filter frame into the the lint off with water. slot.
6. FEATURE AND TECHNICAL EXPLANATION Feature of the Washing Machine 1 The first air bubble washing system in the world. 2 Quiet washing through the innovational low-noise design. 3 The wash effectiveness is much more enhanced because of the air bubble washing system. 4 The laundry detergent dissolves well in water because of the air bubble washing system.
Pulsator System When the pulsator is rotated C.W or C.C.W at a high speed, it makes the cyclone water flow from the asymmetrically designed pulsator as shown below. Asymmetrically designed pulsator makes the cyclone water fow, which get rid of the washing dead zone to increase the washing effect and reduce the entanglement of laundry.
Automatic Unbalance Adjustment This system is to prevent abnormal vibration during intermittent spin and spin process. FUNCTIONAL PRINCIPLE Contact of safety switch Lid closing 1 When the lid is closed, the safety switch contact is “ON” position. 2 In case that wash loads get uneven during spin, the outer tub hits the safety switch Lid opening due to the serious vibration, and the spin...
Lint Filter Much lint may be obtained according to the kind of clothes to be washed and some of the lint may also sticks to the clothes. Filter Filter To minimize this possibility a lint filter is provided on the upper part of the tub to filter the wash water as it Bleach Bleach Inlet Inlet...
Functional Principle of Bubble Washing Machine ACROSS SECTION Air bubble Outer tub Pulsator Nozzle FUNCTIONAL PRINCIPLE Bubble generator supplies the air from the bottom of outer tub to the inner space of pulsator, the air is dispersed by the rotation of pulsator. Air-bubble is created by the centrifugal force, and rises up. EXPLANATION...
7. DIRECTIONS FOR DISASSEMBLY AND ADJUSTMENT Warning BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE WASHING MACHINE, DISCONNECT THE POWER CORD FROM THE ELECTRIC OUTLET. Gear Mechanism Ass’y Replacement Raise the top plate on the outer cabinet. Loosen the pulsator mounting screw and remove Loosen four screws mounting outer tub cover and the pulsator.
Drain Motor and Valve Lay the front of the washer on the floor. Separate the drain motor from the bracket. Loosen the adjustment screw and four bolts Turn the valve lid by using screw driver as shown mounting the drain motor. in figure and remove the valve lid from the valve Take out the wire of drain motor from the bracket.
8. TROUBLE SHOOTING GUIDE NOTES 1. When replace the P.C.B. ASS’Y do not scratch the surface of the P.C.B. ASS’Y. 2. Disconnect the power cord from the electric outlet. Concerning Water Supply PROBLEM CHECK POINT CAUSE SOLUTION Do you open the water Open the water tap.
PROBLEM CHECK POINT CAUSE SOLUTION Does the water supply The water inlet valve is Change the water inlet continue while the power defective. valve. is turned off? Does the water supply start The triac of P.C.B is Change the P.C.B ASS’Y. as soon as you press the defective.
Concerning Draining PROBLEM CHECK POINT CAUSE SOLUTION Do you install the Install the drain hose Improper installation drain hose proper- properly. Is the foreign matter Remove the foreign mat- Malfunction of drainage accumulated inside ter from the pump hous- THE WASHER by the foreign matter the pump housig? DOES NOT...
Concerning Spinning PROBLEM CHECK POINT CAUSE SOLUTION Is the lid open? Close the lid. Does the door switch Change the door switch. Door switch is defective. operate normally? Safety switch is defec- Change the safety Does the safety switch tive. switch.
Concerning Operation PROBLEM CHECK POINT CAUSE SOLUTION Is the plug connect-ed Connect the plug. to electric outlet? Is Fuse opended? Change Fuse THE INDICA- Is the condition of Change P.C.B ASS’Y. Power button is defective power button good? LAMPS(L.E.D) DO NOT LIGHT UP WHEN THE Is the connector of the Improper connection of...
9. PRESENTATION OF THE P.C.B ASS’Y Concerning Error Message MESSAGE CAUSE SOLUTION Install drain hose properly. Improper installation of drain hose. Remove foreign matter from drain hose. The drain hose is blocked up by foreign matter. Change drain motor. Drain motor is inferior. Open the water tap.
In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr) Parts List 1. DWF-1098, 1398, 1068, 1048 PARTS CODE PARTS NAME DESCRIPTION Q’TY...
Page 34
Caution: In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr) PARTS CODE PARTS NAME DESCRIPTION Q’TY...
Page 35
SUS, M5X10 4505E05050 SPECIAL SCREW 5.2X18 3616008700 SPECIAL NUT SUS, FLANGE NUT M5 3616003700 SPECIAL SCREW SUS 5.5X16 3618815200 TUB U FRPP DWF-1098/68 3618815500 FRPP DWF-1398 3616006500 SPECIAL WASHER SUS301 T=0.8 3617200600 FLANGE TUB ALDC12 VE1 3616007000 SPECIAL SCREW SCM24H, 6.5X24...
Page 36
DESCRIPTION Q’TY REMARK 3611410400 COVER TUB O DWF-1098/68 3611413900 DWF-1398 3618807100 TUB O DWF-1098/68 3618807120 PP, PUMP DWF-1098/68, PUMP 3618807110 DWF-1398 3618101400 NOZZLE BODY 3613223300 HOSE AS PVC, BUBBLE 3619802600 SUSPENSION AS (B) DWF-1094, WH, BACK DWF-1098/68 3619803900 DWF-1398, WH, BACK...