Alignment And Adjustments - Samsung TH060EAV Service Manual

3. Alignment and Adjustments

3-1 Indoor Display Error and Check Method
Error detection and reoperation

 If error occurs during the operation, badness is indicated by LED flickering and all operation is stopped except LED.

 When reoperating by remote control and switch determine the error mode after normal operation.

Indoor unit LED lamp display at error detecting

Abnormal conditions
Power reset
Error of temperature sensor
in the indoor unit (Open/Short)
Error of heat exchanger sensor
in the indoor unit
Error of the outdoor temperature sensor
Error of the condensor temperature sensor
Error of the discharge temperature sensor
Indoor and outdoor unit time out
Abnormal data reception more than 60 packet
Indoor unit is not connected
Communication error between the outdoor unit
Main-Inverter Micom(After 1 minute of Main-Inverter
detection)
On, Flickering, OFF
If you turn off the air conditioner when the LED is flickering, the LED is also turned off.
Samsung Electronics
LED lamp display
Green Red Yellow
Green Green Green
Green Orange
Green Green
1. Indoor unit error
(Display is unrelated
with operation)
2. Outdoor unit error
(Display is unrelated
with operation)
Remarks
3-1