Page 4
10/100 Multi-Station Tap PLEASE READ THESE LEGAL NOTICES CAREFULLY. By using a Net Optics Tap you agree to the terms and conditions of usage set forth by Net Optics, Inc . No licenses, express or implied, are granted with respect to any of the technology described in this manual .
10/100 Multi-Station Tap Introduction Net Optics 10/100BaseT Taps supply mission-critical networks with superior network visibility and security access . The breakthrough design of the Net Optics 10/100BaseT Tap ensures zero impact on network traffic while main- taining uninterrupted access for monitoring and security devices . These are the world’s first and only 10/100BaseT Taps offering “zero delay”...
• No IP address is needed for the Tap or monitoring device, enhancing moni- toring security • Redundant power ensures monitoring uptime • Fully IEEE 802.3 compliant (model TP4-CU only) • Fully RoHS compliant Ease of Use • Front-mounted connectors make installation and operation quick and easy •...
10/100 Multi-Station Tap About This Guide Please read the guide before attempting to install 10/100 Multi-Station Tap . This guide covers the following models: Part Number Description TP4-CU 10/100BaseT 4 Station Tap TP8-CU 10/100BaseT 8 Station Tap TP12-CU 10/100BaseT 12 Station Tap...
10/100 Multi-Station Tap Cabling Guidelines • If connecting to Switches or Hubs, use CAT5 RJ45 cross-over cabling . • If connecting to Routers or NICs, use CAT5 RJ45 straight-through cabling . Connecting to the Network 1 . Connect Network Port A to the appropriate switch, server or router using a CAT5 cable .
10/100 Multi-Station Tap Connecting to the Monitoring Device 1 . Supply power to the Tap using the two redundant power supplies included with the unit . Verify that the Power LED illuminates . 2 . Connect Monitor Port A to the appropriate port on the monitoring device using a CAT5 straight-through cable .
10/100 Multi-Station Tap Limitations on Warranty and Liability Net Optics offers a limited warranty for all its products . IN NO EVENT SHALL NET OPTICS, INC . BE LIABLE FOR ANY DAMAGES INCURRED BY THE USE OF THE PRODUCTS (INCLUD- ING BOTH HARDWARE AND SOFTWARE) DESCRIBED IN THIS MANUAL, OR BY ANY DEFECT OR INACCURACY IN THIS MANUAL ITSELF .