Back-Up Lamps; Number Plate Lamp - Cadillac ATS Owner's Manual

10-26 Vehicle Care

Back-Up Lamps

1. Reversing Bulb Socket
2. Reversing Lamp Assembly
To replace one of these bulbs:
1. Reach under the rear fascia and
locate the reversing lamp
assembly.
2. Remove the bulb socket (1) by
turning anticlockwise and pulling
straight out of the lamp
assembly (2).
3. Pull the bulb out of the socket.
4. Install the new bulb in the bulb
socket.
5. Install the bulb socket by turning
clockwise.

Number Plate Lamp

Lamp Assembly
Bulb Assembly
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Push the lamp assembly (3)
toward the centre of the vehicle.
2. Pull the lamp assembly down to
remove.
3. Turn the bulb socket (1)
anticlockwise to remove it from
the lamp assembly (3).