U-Line 3018CLR User Manual page 31

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Clean Cycle
Up
Down
A clean cycle can be initiated through this menu. Once the
cleaning cycle starts, the cycle cannot be stopped until
complete.
To initiate a clean cycle, select "Clean Cycle" from the
Customer Menu. Please refer to CLEANING section
regarding proper cleaning procedure.
1. Press to select "Clean Cycle".
2. Press . The clean cycle will now begin.
3. Refer to CLEANING section regarding proper cleaning
procedure.
Silent Mode
Up
Down
Users can halt ice production for 3 hours with an option
called "Silent Mode" in the Customer Menu. Silent Mode
will begin once the current ice making cycle is complete.
After 3 hours in Silent Mode, normal ice production will
continue.
NOTE: Silent Mode will not silence any alerts.
To initiate Silent Mode, enter Silent Mode Menu from
within the Customer Menu.
Select
RETURN TO MENU
CLEAN CYCLE
CLEAN?
Select
RETURN TO MENU
SILENT MODE
SILENCE?
To activate Silent Mode:
1. Press to select "Silence?".
2. Press . Silent Mode will now begin.
To cancel Silent Mode:
1. Press to select "Cancel?".
2. Press . Silent Mode will end.
Ice Adjust
Up
RETURN TO MENU
Down
The Ice Adjust option adjusts ice thickness by adding or
subtracting up to 5 minutes of ice production.
To change the ice thickness, enter the Ice Adjust Menu
from within the Customer Menu.
To adjust thickness:
1. Press to select "Ice Adjust".
2. Press . The selection will begin to flash.
3. Press to make the ice thicker or
thinner.
4. Press to confirm your choice.
u-line.com
Select
ICE ADJUST
ICE ADJUST = 0
to make the ice
Control Operation 4