Welcome Note SMVB-3010 Thank you for choosing “SMVB-3010”. To provide the better customer service and higher quality product, we are continuousness studying and researching and upload all technical resource onto our web site www.sumit.kr, frequently. You can get every data and information for our products on our web site.
SMVB-3010 automatically begins recording when the power is turned on. When using SMVB-3010 (attached to an Ordinary Power Cable) as an in-vehicle CCTV over an extended period of time, please be mindful of full electric discharge of vehicle battery that might cause the vehicle to stall, despite the device’s inherent Power Management System.
Page 7
Features SMVB-3010 provides HD grade apply to 2M pixels camera. SMVB-3010’s view angle of 140 and 83°(Vertical) are significantly higher than the view angle (commonly at under 120) by VBB devices of the same or higher classes. SMVB-3010 is continued recording.
GPS signal reception does not affect, but the video recording performance. Never remove the SD card from SMVB-3010 while the device ON, which could lead to damage to the SD Card or even to the operating system.
Page 9
Please read the following carefully and completely before using SMVB-3010 Product SMVB-3010 cannot function properly when the device or the memory card is damaged by impact, water, fire, electrical shock and/or other unforeseen circumstances. The manufacturer shall not be held responsible in such...
Page 10
1. Product Information SMVB-3010 1.2 Cautions Please read the following carefully and completely before using SMVB-3010 Power Do not touch that connect the Lighter Jack Adaptor or turn-on the product power on wet hand. It cause by electric shock. Don’t swing the Lighter Jack Adaptor, put it exactly on the location, do not use damaged Lighter Jack Adaptor.
Page 11
1. Product Information SMVB-3010 1.2 Cautions Please read the following carefully and completely before using SMVB-3010 Others Installing or operating the product while you are driving may cause an accide nt. Stop your car at a safe location and install or operate the product.
1. Product Information SMVB-3010 1.3 Components SMVB-3010 Main body SD Memory Card Bracket Hexagonal Wrench Lighter Jack AV Cable (3m) GPS Module Ordinary Power Cable Adaptor (3m) (Option) (Option) Vehicle IT innovator!, ATM Co. Ltd.
Page 13
1. Product Information SMVB-3010 1.3 Components Operation LED Indicator (Blue, Yellow) GPS port AV IN Jack Camera DC Power Jack ▼ button MODE button ▲ button SD Memory Card Slot Vehicle IT innovator!, ATM Co. Ltd.
1. Product Information SMVB-3010 1.4 Installation • Choose the installation Position Choose the installation position of this product and wipe this position clean. We recommended that the best installation position is the right side or back side of the rearview mirror.
Page 15
Insert the SD Card into main body until clicking with same direction between top of SD card and top of main body. ※ Insert/Remove the Micro SD card while the SMVB-3010 is turned off. (This may corrupt the data or result in a product malfunction.) •...
Page 16
Remove a preventing coating vinyl of double side adhesive tape. • Attaching Device to Windscreen & Adjust View Angle Stick the Bracket along with the SMVB-3010 Device onto the desired installation position on the windscreen. With the Bracket firmly attached on the windscreen, adjust the SMVB-3010 device until the camera is pointing towards the front or towards your desired position.
2. How to Operate SMVB-3010 2.1 Power ON / OFF Power ON When connects between DC-IN jack on the main body and cigarette Jack on a vehicle using cigarette jack adaptor, power of this product is turned on.(In case of using ordinary power cable, power is always on.) If power is on, it starts the video record with double beep sounds.
2. How to Operate SMVB-3010 Recording Mode Selection Ordinary Recording Mode The ordinary Recording Mode start with triple “beeping” sound. The booting is started with indicated by blue LED. When the device is turned ON, indicated by two lit LED indicators (blue and yellow) and the audio guide “recording starts.”...
Recording Mode Selection Motion Detection Mode When no vehicle movement is detected for continuous ten (10) minutes, SMVB-3010 goes into Motion Detection Mode, which triple “beeping” sound and the audio guide “Starting Motion Detection Mode.” During Motion Detection Mode, SMVB-3010 remains dormant most of the time, indicated by two blinking LED indicators .
2. How to Operate SMVB-3010 Recording Mode Selection Enforced Event Recording Mode Push the “▲” button for 3(three) seconds. Switch to “Enforced Event Recording Mode” is indicated by a triple Push ‘▲ ‘ button for beeping sound with audio guide “Enforced Event Recording Mode starts.”...
2. How to Operate SMVB-3010 2.4 Audio guide setting The audio guide ends with the audio guidance “Audio guidance end.”, when push “▲” button shortly once. Push the “▲” button shortly once again, starts with the audio guide Push the”▲”button shortly voice “audio guide starts.”...
LED indicator. When the SD card format end, the device will be restarted with audio guide “Car DVR(or Vehicle Black Box) System restart.”. Then the device restarts. ※ Please the SD card format in regularly.
When the device turned on, the audio guide “Device update.” with indicated by a single lit yellow LED and starts Firmware update. When the Firmware update is completed, the SMVB-3010 restarts after the audio guide “Firmware update is completed.” ※ Do not off the power while updating the firmware. It can be damage on product.
“▼” for 6 sec SD Format 3 X Beeps Start format SD card format end. Car DVR(or SD Format completed Automatic Vehicle Black Box) System restart Firmware Update Reboot Car DVR system updated Car DVR(or Vehicle Black Box) Firmware Update completed Automatic...
PC Viewer 3. How to Use SMVB-3010 PC Viewer Installation 2. Download “SumIT Viewer HD” program and → reference → S/W 1. Log on to www.Sumit.kr extract to laptop or PC. Download and download the PC Viewer. 4. Use “SumIT Viewer” freely.
PC Viewer 3. How to Use SMVB-3010 3.2 execute the Viewer Shortcut menu for the icon “the SumIT Viewer” , double-click to execute “SumIT Viewer” program. Use “SumIT Viewer” freely. Vehicle IT innovator!, ATM Co. Ltd.
PC Viewer 3. How to Use SMVB-3010 3.3 Loading a file ① Click on “Loading a file” button, choose a removable disk driver. ② Then, click on “Accept” button that a file name is created on the file list. (time line) ③...
Page 29
PC Viewer 3. How to Use SMVB-3010 3.4 Display construction original size play Hide/power off Name of file Play list Play screen Map interworking Impact detection information Drive speed setting Viewer information Image capture Save the file of other name...
Page 30
PC Viewer 3. How to Use SMVB-3010 3.4 Display construction Load file Play/ Pause Playback previous file Move to previous frame Playback file Play speed bar controller Bright of Playback control bar Temporary stop Move to frame next Volume controller Playback next file Vehicle IT innovator!, ATM Co.
Page 31
PC Viewer 3. How to Use SMVB-3010 3.5 Display size When you playback the video file, the file plays on Viewer size. If you want to play original size, you can click on “see the original size”. The original size is 1280X720.
PC Viewer 3. How to Use SMVB-3010 3.6 PC Viewer setting Audio setting Audio guide setting : Turn ON/OFF audio guide function (Basic setup : ON) Audio Recording setting: Turn ON/OFF audio recording function (Basic setup : ON) -Parking mode setting Motion Detection recording Mode : Turn on/off motion detection recording mode.(Basic setup : ON)
Page 33
PC Viewer 3. How to Use SMVB-3010 3.6. PC Viewer setting -System Time Basic setting of time is on the PC. Time process is displayed on an year, month, date, hour, minute, second. If you revise some parts, using keyboard after click on the area.
Page 34
PC Viewer 3. How to Use SMVB-3010 3.6 PC Viewer setting - G-Sensor Sensitivity Insensitive: The sensitivity is low when Event Recording Mode.” (Recording repetition rate is low.) Normal : The sensitivity is regular when Event Recording Mode.” (Recording repetition rate is normal.) Sensitivity(basic setting) : The sensitivity is high when Event Recording Mode.”...
Page 35
PC Viewer 3. How to Use SMVB-3010 3.6 PC Viewer setting -SD memory card Format : Format the SD card which is recording file. There is a Format pane, clock on the “Format Disk”. The Format is started, when you click on the “Start” button.“...
PC Viewer 3. How to Use SMVB-3010 3.7 Image capture - Image capture When you click on “image capture” button, there is a window for save the image. Write the file name and choose the location on the file and click the “save” button, then the capture file is saved on the location channel.
PC Viewer 3. How to Use SMVB-3010 3.8 Back-up a video file -Back-up a video file When you click on “save video file” button, there is a window of save for video. Write the name of file (basic setting: name of original video file) and choose (location on the file and click to the “save”...
4. Guarantee SMVB-3010 This product conforms to and is made under strict quality control. For repairing this product in free, this form must be filled out this form and presented with the product. This guarantee card is valid in Korea and becomes void in overseas.
Page 40
4. Guarantee SMVB-3010 ▶ Repairing In charge Repairing service is charged (for repairing & parts) as follow. 1. Without the guarantee period 2. Within the guarantee period - Losing the guarantee card or an omission in the guarantee card - Damages due to improper use or careless handling - Damages due to customer’s intentional or negligent function failure...