Table of Contents
Advertisement
4
OCR Programming
Introduction
Use this section to program the hand-held Imager to read machine readable
fonts used in optical character recognition (OCR). The IT4400 reads 6 to 60
point OCR typeface
The IT4400/4700 will read the following fonts:
• OCR-A
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
()<>/\+-*$
• OCR-B
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
()<>/\+-*$
• U.S. Currency Serial Number (Money)
*
You can either select an OCR default, or create your own custom template for
the type of OCR format you intend to read. See "OCR" on page 4-2 for
programming codes that will enable your scanner to read OCR-A, OCR-B or U.S.
Currency fonts. See "Creating OCR Templates" on page 4-3 if you want to
create a custom "template," or character string that defines the length and
content of OCR strings that will be read with your scanner.
4 - 1
Advertisement
Table of Contents
