Advertisement
Table of Contents
- 1 Table of Contents
- 2 Safety Information
- 3 To Access Control Panel
- 4 Operating Instructions
- 5 Replacing the Remote Control Battery
- 6 Plugging in the Heater
- 7 Installation Instructions
- 8 Care and Maintenance
- 9 Replacing Light Bulb
- 10 Cleaning
- 11 Troubleshooting
- 12 Trim Kits Installation
- Download this manual
Advertisement
Table of Contents
Need help?
Do you have a question about the WF2613R and is the answer not in the manual?
Questions and answers
What does E1 mean? We turned it on and we saw a spark and noticed a hot smell. shut it off and when we turned it back on it works fine. E1 showed up on it when I turn it off.
The E1 error code on the Greystone WF2613R typically indicates a water inlet issue. This can be caused by low water pressure, a clogged or kinked inlet hose, or a faulty water inlet valve. To resolve this issue, check the water supply, ensure the inlet hose is not blocked or damaged, and inspect the inlet valve for any malfunctions. If the problem persists, further troubleshooting or professional service may be needed.
This answer is automatically generated
@Mr. Anderson this is a electric fireplace?
We have this unit and we need the heater fan combination. Where can I find one?