JBL SB300 Quick Start Manual

Powered soundbar with powered subwoofer
Hide thumbs Also See for SB300:

Advertisement

SB300
Powered soundbar with powered subwoofer
thank You For chooSIng thIS JBl
The SB300 is a two-piece home theater speaker system that
includes a powered stereo soundlbar speaker, a wireless 8-inch
(200mm), 100-watt powered subwoofer and all of the cables you
need to connect the soundbar to your TV and your cable/satellite
tuner or DVD player. Both components feature the dynamic new
JBL Weave design for a distinctive, one-of-a-kind look.

Included ItemS

1X
Product
®
1X
On/Off
Aux
Digital
Input
Input
Stereo
Surround
Vol.+
Mute
Vol.–
1X
2X
quick-start guide
We're confident that this JBL system will provide every note
of enjoyment that you expect – and that when you think about
purchasing additional audio equipment for your home, car or office,
you will once again choose JBL products.
This quick-start guide contains all the information you need to set
up, connect and adjust your new speaker system. For more in-
depth information, go to our Web site: www.jbl.com.
2X
1X

Advertisement

Table of Contents
loading

Summary of Contents for JBL SB300

  • Page 1: Included Items

    You For chooSIng thIS JBl Product ® The SB300 is a two-piece home theater speaker system that We’re confident that this JBL system will provide every note includes a powered stereo soundlbar speaker, a wireless 8-inch of enjoyment that you expect – and that when you think about...
  • Page 2: Soundbar Rear-Panel Controls And Connections

    Mute Button (remote control only): Press the Mute button to mute the SB300 system. (The Power indicator flashes blue.) While the system Power Button On/Off is muted, press the Mute button again or the Volume Up/Down button to restore the sound.
  • Page 3: Subwoofer Rear-Panel Controls

    This phenomenon depends in part on the relative placement of the speakers in the room. See Subwoofer Phase Switch , on page 7, for more information. www.jbl.com www.jbl.com...
  • Page 4: Speaker Placement

    SPeaker Placement PLaciNg tHe sOuNdBar ON a taBLe PLaciNg tHe suBWOOFer If your TV is placed on a table, you can place the soundbar on the table The performance of a subwoofer is directly related to its placement in directly in front of the TV stand, centered with the TV screen. As long the listening room and its physical position relative to the other speakers as the surface of the table is flat, the soundbar will rest on its rubber in the system.
  • Page 5 Power Cord connectors, and plug the other ends into the soundbar’s Source 2 (optical digital) input. active, unswitched AC outlets. Do NOT plug these cords into the accessory outlets found on some audio components. sB300 soundbar Power Cord To Unswitched Stereo Audio...
  • Page 6: Pairing

    uSIng Your SoundBar SYStem turNiNg tHe sOuNdBar ON aNd OFF adJustiNg tHe sYsteM’s VOLuMe On/Off Set the soundbar’s Power switcn to the “On” position. Press the soundbar’s or remote’s Volume Up and Down buttons to Digital raise and lower the system’s volume one step at a time. Hold down the Input Input buttons to continuously raise or lower the volume.
  • Page 7: Specifications

    42Hz – 20kHz (–3dB) transition of bass frequencies between the subwoofer and the soundbar for a variety of different rooms and subwoofer locations. Cutoff sB300 cNtr POWered sOuNdBar sPeaker Two 2" (51mm) cones per channel, video- Low-frequency transducer: shielded 40Hz...
  • Page 8 © 2010 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DTS and the Symbol are registered trademarks and the DTS logos are trademarks of DTS, Inc.

Table of Contents