Epson 530 Setup And Troubleshooting Manual

BASIC SETUP
1. Remove the projector from the packaging and place it on a stand or table with the lens facing
the direction you want the image to be projected. If there is a lens cover, remove it from the
lens.
2. Connect the included power cord into the projector and plug into a wall outlet or a heavy duty
extension cord. If there is one included, remove the lens cover from the projector.
CONNECTING YOUR SOURCE
1. To connect your laptop to the projector, connect the included VGA cable from the VGA output
of the laptop to the VGA input of the projector.
2. To connect to a MAC computer, you will need a MAC adapter between the laptop and the VGA
cable MAC adapter packs are available as a separate rental item with ATS Rentals as well.
3. Detailed instructions on connecting your computer to the projector using these and other
options can be found on pages 33 - 36 in the instruction manual.
4. There are multiple ways to connect to other sources, such as DVD players, as well. You can
find detailed instructions on pages 36 - 44 in the instruction manual.
CONNECTING TO AUDIO
1. The projector itself has a small built-in speaker that is about equivalent to the sound of a laptop
speaker. To connect your laptop to the projector sound, use the included ⅛" audio cable
between the computer audio output and the projector audio input.
2. For louder sound you can connect the audio output from your source to a PA system or
portable stereo. When doing this, the audio does not need to connect through the projector at
all. Connect a suitable cable from your source (laptop or DVD player) to your audio system.
TESTING AND ADJUSTMENT
1. Turn the projector on using the power button on the top of the projector. Turn on the source
that is connected to your projector as well. The projector should automatically search for a
connected source. As the projector warms up, the image will start to appear.
2. You can adjust the image size by either moving the projector closer or further from the screen
or wall that the image is being projected on.
3. Adjust the focus by using the focus ring that is on top of the projector, behind the lens.
4. More detailed instructions on setting up the projector can be found on pages 24 - 32 of the
instruction manual.
Questions? Call 1-815-686-2687 or email atsinfo@atsrentals.com.
For urgent technical support outside of business hours call 1-815-230-1911.
Epson 530 Projector
Setup and Troubleshooting Guide
Page 1 of 2