Front Handle Cover - Honda ANF125 Owner's Manual

FRONT HANDLE COVER

The front handle cover must be removed
for headlight and position light bulb
replacement.
Removal:
1. Pull up the dust covers ( ).
2. Loosen the lock nuts ( ) until they will
no longer turn.
3. Remove the rearview mirrors ( ).
4. Remove the front top cover (page
5. Remove the screws A ( ) and screws B
( ). 5
6. Remove the bolt ( ).
7. Remove the front handle cover ( ), then
disconnect the connectors ( ).
Installation:
Installation can be done in the reverse
order of removal.
To install the rearview mirrors.
1. Install the rearview mirrors until
they will no longer turn.
46
1
2
3
43 ).
4
6
7
8
http://mototh.com
2. L oosen t he rea rview mirrors
approximately 2 turns.
3. Adjust the rearview mirrors.
4. Tighten the lock nuts and install the
dust covers.
(2)
(7)
(8)
(5)
(6)
(1) Dust covers
(2) Lock nuts
(3) Rearview mirrors
(4) Screws A
(5) Screws B
(3)
(1)
(2)
(4)
(5) (8)
(6) Bolt
(7) Front handle cover
(8) Connectors