D-Link Nvr Search Utility; Windows - D-Link DNR-322L User Manual

Section 3 - Configuration
For Windows, you can insert the CD and click NVR Search Utility to run another useful setup tool. For Mac, please go on to
Page 41. When first powered on, during the initial boot sequence, the device will wait to be assigned an IP address via DHCP.
If it does not receive a DHCP-assigned IP address the Auto-IP process will assign a 169.254.xxx.xxx address to the device. If
you want to change the IP address before logging in or are unable to connect to the NVR IP address, you can use the NVR
Search Utility provided on the product CD to locate the device on your network and make any needed changes.
Network Video The D-Link NVR Search Utility displays any NVR devices it detects on
Recorder: the network.
Refresh: Click to refresh the device list.
Click Configuration to access the Web-based configuration of the
Configuration:
NVR.
LAN:
Configure the LAN Settings for the NVR.
Receive DHCP:
Select Enable to use DHCP for your LAN IP settings, or Disable to use
static IP.
Apply:
Click Apply to save and activate the changes to the LAN Settings.
Drive Mapping:
Volumes available for mapping are displayed here.
Available Drive
Letters: Select an available drive letter. Click Connect to map the selected
volume. Click Disconnect to disconnect the selected mapped volume.
About:
Click About to view the software version of the NVR Search Utility.
Exit:
Click Exit to close the utility.
D-Link DNR-322L User Manual

D-Link NVR Search Utility

Windows

39