This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily.
Method
Press the ATR button on the
remote control for more than
2 seconds during PLAY.
Make the short circuit
between the test point of
SERVICE and the GND.
VHS Alignment Tape
VHS Alignment Tape
MHP
MHP-L
Torque Tape
Short Jumper
PUJ48076-2
MECHANISM ADJUSTMENT PARTS LOCATION GUIDE
3
2
1
10
9
SERVICE MODE LIST
Adjusting of the Tracking to the center position.
Refer to the "MECHANICAL ADJUSTMENT" (GUIDE ROLLER) and "ELECTRICAL
ADJUSTMENT" (SWITHCHING POINT).
The BOT, EOT, and the Reel Sensor do not work and the deck can be operated
without a cassette tape.
Refer to the "PREPARATION FOR SERVICING"
SERVICING FIXTURES AND TOOLS
Torque Gauge
PUJ48075-2
8
Operations
Roller Driver
PTU94002-2
4
5
1. Tension Connect
2. Tension Arm
3. Guide Roller
4. Audio/Control Head
5. X value adjustment driver hole
6. P4 Post
6
7. T Brake Spring
8. T Reel
9. S Reel
10. Adjusting section for the Tension Arm position
7
X-JG153 X Value Adjustment
Screwdriver
1-13