GMC Yukon Denalid Owner's Manual page 328

v
(Title): Press this button to return the DVD to
the main menu of the DVD. This function may
vary for each disc.
y
(Main Menu): Press this button to access the
DVD menu. The DVD menu is different on
every DVD. Use the up, down, left, and right arrow
buttons to move the cursor around the DVD
menu. After making a selection press the enter
button. This button only operates when using
a DVD.
n q p o
, , , (Menu Navigation Arrows): Use
the arrow buttons to navigate through a menu.
r
(Enter): Press this button to select the choice
that is highlighted in any menu.
z
(Display Menu): Press this button to adjust
the brightness, screen display mode (normal,
full, or zoom), and display the language menu.
328
(Return): Press this button to exit the current
q
active menu and return to the previous menu.
This button will operate only when the display
menu or a DVD menu is active.
(Stop): Press this button to stop playing,
c
rewinding, or fast forwarding a DVD. Press
this button twice to return to the beginning of
the DVD.
s
(Play/Pause): Press this button to start
playing a DVD. Press this button while a DVD is
playing to pause it. Press it again to continue
playing the DVD.
When the DVD is playing, depending on the radio,
you may be able to do slow play by pressing
the pause button then pressing the fast forward
button. The DVD will continue playing in a
slow play mode. You may also, depending on the
radio, perform reverse slow play by pressing
the pause button and then pressing the fast
reverse button. To cancel slow play mode, press
the play/pause button.