Pjlink; Command Details - Sony VPL-DX125 Protocol Manual

4-3-3. PJLink

The following model is equipped with the PJLink class1 protocol.
For details about this protocol, refer to the PJLink specifi cations published from JBMIA.
You can turn on or off the PJLink protocol and set a password from the Web setting screen > Setup >
Advanced Menu > PJLINK.
When the authentication setting is changed, the connected controller will be disconnected.
This protocol is set to OFF by default.
n
PJLink is a registered trademark of Japan Business Machine and Information System Industries Associa-
tion.

1. Command Details

Command Data
POWR 0
1
POWR ?
INPT 1*
2*
3*
4*
5*
INPT ?
AVMT 10
11
20
21
30
31
AVMT ?
VPL-EX225
Remark
Changes the projector's power status to 'Standby'.
Changes the projector's power status to 'Lamp ON'.
The following values are returned:
0 : Standby
1 : Lamp ON
2 : Cooling state
3 : Warm-up state
4 : Unacceptable period
5 : Projector defect
Changes the projector input to 'RGB*'.
Changes the projector input to 'VIDEO*'.
Changes the projector input to 'DIGITAL*'.
Changes the projector input to 'STORAGE*'.
Changes the projector input to 'NETWORK*'.
The following values are returned:
1*: RGB*
2*: VIDEO*
3*: DIGITAL*
4*: STORAGE*
5*: NETWORK*
Cancels the projector's video muting.
Sets the projector's video muting.
Cancels the projector's audio muting.
Sets the projector's audio muting.
Cancels the projector's video + audio muting.
Sets the projector's video + audio muting.
The following values are returned:
11 : Projector video muting ON
21 : Projector audio muting ON
30 : Projector video + audio muting OFF
31 : Projector video + audio muting ON
27 (E)