Marantz NR1606 Owner's Manual page 175

Contents Connections
o Smart Menu
This function can be used to configure the settings of this unit, select
an input source and set Tuner and Internet Radio stations using the TV
remote control.
On:
Off:
0 "Smart Menu" can be set when "HDMI Control" is set to "On". (v p. 171)
NOTE
0 If the "Smart Menu" settings have been changed, always reset the power to
connected devices after the change.
0 The Smart Menu function may not work properly depending on the
specifications of your TV. In this case, set "Smart Menu" to "Off".
Front panel Display
Playback
Use Smart Menu function.
Do not use Smart Menu function.
Rear panel
Settings
Output Settings
Makes settings for video output.
0 Can be set when "HDMI", "COMP" or "VIDEO" is assigned for each input source.
(v p. 182)
0 "Resolution", "Progressive Mode" and "Aspect Ratio" can be set when "i/p Scaler"
is set to anything other than "Off". ("Resolution" (v p. 178), "Progressive
Mode" (v p. 178), "Aspect Ratio" (v p. 179))
0 "Output Settings" cannot be set when 4K signals are input.
0 "Video Conversion", "i/p Scaler", "Resolution", "Progressive Mode" and "Aspect
Ratio" settings are stored for each input source. ("Video Conversion" (v p. 176),
"i/p Scaler" (v p. 177), "Resolution" (v p. 178), "Progressive
Mode" (v p. 178), "Aspect Ratio" (v p. 179))
175
Remote
Tips Appendix
Index