Choosing An Exposure Mode; Program Ae (P) - FujiFilm X-T10 Owner's Manual

Choosing an Exposure Mode

Choosing an Exposure Mode
When the auto mode selector lever is rotated to z, you can choose from the following exposure
modes: program AE (P), shutter-priority AE (S), aperture-priority AE (A), and manual (M).

Program AE (P)

Program AE (P)
To allow the camera to adjust both shutter speed and aperture
for optimal exposure, rotate the auto mode selector lever to z
and set shutter speed and aperture to A. P will appear in the
display.
Q If the subject is outside the metering range of the camera, the shutter
speed and aperture displays will show "– – –".
Program Shift Program Shift
If desired, you can rotate the front command dial to select other combinations of
shutter speed and aperture without altering exposure (program shift). The new
values for shutter speed and aperture are shown in yellow. Program shift is not
available if the attached fl ash supports TTL auto, or if an auto option is selected
for U DYNAMIC RANGE or N ISO in the shooting menu (P 60, 94). To cancel
program shift, turn the camera off .
Aperture mode switch
P 4000 5.6 400
Shutter speed
P 4000 5.6
400
Aperture
51