Scientific Atlanta AllTouch AT8550 User Manual

Scientific Atlanta AllTouch AT8550 User Manual

Hide thumbs Also See for AllTouch AT8550:

Advertisement

FCC Compliance

United States FCC Compliance
Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment OFF and
ON, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the cable company or an experienced radio/television technician for help.
Any changes or modifications not expressly approved by Scientific-Atlanta could void the user's authority to
operate the equipment.
The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the FCC and is
intended to supply you with information regarding the FCC approval of this device. The phone numbers listed are
for FCC-related questions only and not intended for questions regarding the connection or operation for this device.
Please contact your cable service provider for any questions you may have regarding the operation or installation
of this device.
FCC Declaration of Conformity
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1) the
device may not cause harmful interference, and 2) the device must accept any interference received, including
interference that may cause undesired operation.
AT8550 AllTouch Remote Control Rev C
Scientific-Atlanta, Inc.
5030 Sugarloaf Parkway
Lawrenceville, Georgia 30044 USA
Telephone: 770-236-1077
Canada EMI Regulation
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada.
20
®
AT8550
AllTouch
Remote Control Rev C
User's Guide
Device Program Codes
If you program codes to control
devices, record your codes here:
CBL: _____________________
TV: _______________________
VCR: _____________________
DVD: _____________________
AUX: _____________________
AllTouch, Explorer, Scientific-Atlanta, and the Scientific-Atlanta
logo are registered trademarks of Scientific-Atlanta, Inc.
8000 and AT8550 are trademarks of Scientific-Atlanta, Inc.
All other trademarks shown are trademarks of their respective
owners. Product and service availability subject to change
without notice.
Scientific-Atlanta, Inc.
5030 Sugarloaf Parkway
P.O. Box 465447
Lawrenceville, GA 30042
www.scientificatlanta.com
© 2005 Scientific-Atlanta, Inc. All rights reserved.
March 2005 User's Guide Part Number 734357 Rev B
AT8550
AllTouch
®
Remote Control Rev C
User's Guide
PIP
CH
1

Advertisement

Table of Contents
loading

Summary of Contents for Scientific Atlanta AllTouch AT8550

  • Page 1: Fcc Compliance

    ™ AT8550 AllTouch ® ™ ® AT8550 AllTouch Remote Control Rev C Remote Control Rev C FCC Compliance User’s Guide User’s Guide United States FCC Compliance Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 2: In This Guide

    In This Guide VCR Codes DVD Codes CD Codes 2157 Sharp 2122, 2123, 2198 Ricoh 2034 Sherwood 2124 Onkyo 2159 Runco 2028 Panasonic 2160 Sony 2054, 2063, 2064, Samsung 2004, 2009, 2011, 2125, 2126, 2127, Welcome to the Ultimate Control Experience! ................. 3 2041 Pioneer 2161...
  • Page 3: Welcome To The Ultimate Control Experience

    Welcome to the Ultimate Control Experience! VCR Group: VCR and DVR TV Codes VCR Codes Devices 2005, 2006, 2007, ™ ® Soundesign 1004, 1006, 1008, Your new AT8550 AllTouch Universal Remote Control (remote) is a true universal 2013, 2031, 2033, 1034, 1040 2039 DVR Codes...
  • Page 4: Quick Reference

    Quick Reference TV Group: TVs and HDTVs Viewing and Browsing Control TV Codes TV Codes TV Codes Optonica 1079, 1139 Hitachi 1004, 1006, 1010, Displays the program guide Non-Responsive Mode 1254 1011, 1012, 1050, Orion 1031, 1152 Admiral 1001, 1139, 1159 1051, 1052, 1109, Panasonic 1003, 1045, 1136,...
  • Page 5: Code Tables

    Code Tables DVR Control PIP Control If the remote does not recognize your device, you can find codes for your device by Replays the previous few Opens or closes the Picture- brand. With combination devices (such as a TV with a built-in DVD player), you have seconds of a program in-Picture (PIP) window separate codes for each device component.
  • Page 6: What Devices Can I Control

    What Devices Can I Control? Put It Back the Way I Got It The mode keys arched across the top of the remote tell the remote which device you Return specific advanced functions or all advanced functions back to their original want to operate.
  • Page 7: Change Vcr/Vod Programming

    Reassigning Mode Keys Change VCR/VOD Programming (Program Code 9 9 2) Your remote is originally programmed in one of the following ways: 1. Press and hold SELECT and CBL until all mode keys blink twice. • The Rewind, Play, Fast Forward, Stop, Pause, and Record keys (the transport keys) 2.
  • Page 8: What If None Of The Codes Work

    What If None of the Codes Work? Change Channel Control If none of the codes listed for your brand of device operate the device correctly, you can Your remote is originally programmed in one of the following ways: search through the code library for a valid code. •...
  • Page 9: Change Volume Control

    Which Code Worked? Change Volume Control Find out which code programmed the mode key to control your device. Your remote is originally programmed in one of the following ways: • The remote controls volume for one device, such as your TV, whether the remote is Finding the Code That Worked in TV, VCR, DVD, or CBL mode.
  • Page 10: Change Power Control

    Change Power Control Want An Example? If you want to control power for the TV and the cable box at the same time, you would Your remote is originally programmed in one of the following ways: do the following: • The remote controls power for only one device at a time. For example, in CBL mode 1.

Table of Contents