Major Components; Transient Voltage Surge Suppression (Tvss) & Emi / Rfi; Filters; Transfer Switch - Liebert PSP User Manual

M C
AJOR OMPONENTS
Input
TVSS &
EMI / RFI
L

Filters

N
G
Transient Voltage Surge Suppression (TVSS) & EMI / RFI
Filters
These UPS components provide surge protection and filter electro-
magnetic interference (EMI) and radio frequency interference (RFI).
They minimize surges or interference present in the utility line and
keep the sensitive equipment protected.

Transfer Switch

In Normal mode the Transfer Switch passes utility AC power to the
connected load. When input utility or frequency is outside acceptable
limits, the transfer switch activates and transfers the UPS to battery.

Battery Charger

In Normal mode, the Battery Charger converts utility AC power into
regulated DC power to float charge the battery. It is continuously
charging the battery whenever the UPS is plugged into a power outlet
and utility power is within acceptable limits—even if the UPS is
turned OFF.

Battery

The PowerSure PSP utilizes a valve-regulated, nonspillable, lead acid
battery. To optimize battery life, operate the UPS in an ambient tem-
perature of 68°-77°F (20°-25°C).

Inverter

When utility power fails, the Inverter draws energy from the battery
and inverts it into a regulated stepped sinewave supplying power for
equipment connected to the orange receptacles.
Battery
Charger
7
Battery
Output
Transfer
Switch
Inverter
L
N
G