Alinco DJ-100 Instruction Manual page 7

•
Use only the genuine Alinco accessories listed in this instruction manual for RF safety. Third party
accessories are not guaranteed for RF safety by Alinco.
The above provides the information needed to make users of this transceiver aware of RF exposure, and
what to do to assure that this transceiver operates with the FCC RF exposure limits.
•
Electromagnetic Interference/Compatibility
During transmissions, a transceiver generates RF energy that can possibly cause interference with other
devices and/or systems.
To avoid such interference, turn off the transceiver in areas where signs are posted to do so. NEVER
operate transceivers in areas that are sensitive to electromagnetic radiation such as hospitals, blasting
sites, aboard aircraft and similar advanced vehicles etc. Do not expose magnetic cards such as credit
cards in a very close vicinity to a transceiver; it may erase the magnetic data. A person using medical
devices such as a pacemaker MUST NOT use this transceiver, as interference may cause malfunction to
such medical devices.
•
Occupational/Controlled Use
This product is used in situations that users are exposed to RF as consequence of their employment
provided those users are fully aware of the potential RF hazards and can exercise control over their
exposure.
•
This transceiver is NOT ATEX approved and NOT intended for the use in hazardous explosive
atmospheres.
•
California residents only: Please note per Proposition 65 that Li-Ion battery pack in this product
may contain chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm.