Advertisement
Introduction
Encore's ENNPOE-S PoE Splitter fully complies with the industry standard IEEE 802.3af and can
work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) as well as PoE Injectors
to deliver 12VDC, 9VDC or 5VDC to the device that does not support PoE technology in which the
PoE technology allows the existing Ethernet infrastructure to transmit electrical power, along with
network data, to remote IP endpoints over Ethernet cables, which can greatly save the cost of
using an external individual power cables. Your network can benefit from PoE technology for it will
ensure the normal working status of your network while keeping the existing Ethernet infrastructure
secure.
The ENNPOE-S is a single-port Power-over-Ethernet (PoE) injector. Design for use over Gigabit
Ethernet 1000 Base-T Ethernet networks and is backward compatible with older 10Mpbs and
100Mbps Ethernet networks. The ENNPOE-S function is to receive network data and DC power
from any PSE or PoE source device in one Ethernet cable then split them to non-PoE-PD devices.
Key Features
Connect network devices at Gigabit speeds all within a compact device
Automatically detects PoE terminals and supplies inline power
Easily install non-PoE devices where a power outlet is not available
Reduce installation and network equipment costs
Safeguards network device with short circuit protection
Adjustable output DIP switch for 5V, 9V, and 12V DC power adjustable output
Converts Non-PoE PD devices with Power-over-Ethernet
Auto-sensing power drawn from 802.3af / 802.3at Power Source Equipment (PSE) devices
Supplies power up to 25 watts electrical power
Package Contents
1. One ENNPOE-S Splitter
2. One Power cable
3. One Quick Installation Guide
4. One Screw package
Notes: Make sure that the package contains the above items. If any of the listed items are
damaged or missing, please contact with your distributor.
Encore PoE Splitter
3
ENNPOE-S
Advertisement
