Universal Audio apollo Hardware Manual page 28

Monitor Outputs 1 – 2
Connector Type
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
Total Harmonic Distortion + Noise
Stereo Level Balance
Output Impedance
Maximum Output Level
Stereo Headphone Outputs 1 & 2
Connector Type
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
Total Harmonic Distortion + Noise
Maximum Output Power
DIGITAL I/O
S/PDIF
Connector Type
Format
Supported Sample Rates (kHz)
ADAT
Connector Type
Format
Supported Sample Rates (kHz)
Channel Assignments @ 44.1 kHz, 48 kHz
Channel Assignments @ 88.2 kHz, 96 kHz
Channel Assignments @ 176.4 kHz, 192 kHz
Word Clock
Connector Type
Lock Range
Word Clock Input Termination
Synchronization Sources
Internal, Word Clock, S/PDIF, ADAT
Apollo FireWire Hardware Manual
" Female TRS Balanced
20 Hz – 20 kHz, ±0.1 dB
115 dB (A–weighting)
114 dB (A–weighting)
–103 dB
±0.05 dB
600 Ohms
+20 dBu
" Female TRS Stereo (unbalanced)
20 Hz – 20 kHz, ±0.1 dB
113 dB (A–weighting)
113 dB (A–weighting)
–102 dB
80 milliwatts into 600 Ohms
Female Phono (RCA)
IEC958
44.1, 48, 88.2, 96, 176.4, 192
Optical TOSLINK JIS F05
ADAT Digital Lightpipe with S/MUX
44.1, 48, 88.2, 96, 176.4, 192
Port 1 = Channels 1 – 8, Port 2 = 1 – 8 (mirrored)
Port 1 = Channels 1 – 4, Port 2 = Channels 5 – 8
Port 1 = Channels 1 – 2, Port 2 = Channels 3 – 4
BNC
±0.5% of any supported sample rate
75 Ohms, switchable
(continued)
28 Specifications