Ultra Products ULT31860 User Manual page 7

1. In FM Radio mode, press down the joystick "
"Auto Scan" function.
2. Start "Auto Scan" to define pre-set channels.
3. Make sure when proceeding with "Auto Scan", the headset is connected to the MP3
player (Headset works as the antenna when ULTRA-MP3 is in FM mode).
Selecting pre-set memory channel.
1. In FM Radio mode, press Play button "
2. Pre-set memory channel number (1-25) blinked.
3. Move the joystick " " left and right to select through pre-set memory channel
(No.1-25).
4. Set up selected pre-set memory channel by pressing Play button "
Saving favorite FM stations in pre-set memory channels.
1. While completing pre-set channel selection.
2. In setting mode, select your favorite FM channel.
3. Press down the joystick " " and scroll to " Setting " scroll to " Save Band "
4. Press down the joystick " " again to save the FM station
in pre-set memory channel.
5. "Channel Setting" shows on the LCD while completed.
" and scroll to "Setting" to enter
" .
" again.
11
Browsing for Pre-set memory bands
1. In FM Radio mode, press Play button "
2. Move the joystick " " left and right to select through pre-set memory band
(No.1-25).
Auto Scan

1. In setting mode, press down the joystick "
2. Press down the joystick " " again to start channel searching.
3. Search for channels and auto-saved in pre-set memory bands.
Record

1.Press the center of joystick " " and then scroll to Record.
2.Press down the joystick " " and It starts to the voice recording.
3.Press the Play button " " to pause voice recording.
4.Press the Stop button " " to stop voice recording.
" .
" and scroll to Auto Scan.
12