Panasonic VIERA TH-L32X25A Operating Instructions Manual page 27

Menu Item
VIERA Link
Power on Link
Power off Link
Standby Power
Save
Intelligent Auto
Standby
Shipping
Condition
System Update
Software
Licence
System
Information
Auto Standby
Power Save
16:9 Overscan
Region Select
Daylight Saving
Time
DVI Input
Setting
●
A different menu will be displayed in the mode of SD Card (p. 36 - 42).
●
Only available items can be selected.
TH-L32X25A_EN.indd 27 TH-L32X25A_EN.indd 27
Adjustments / Configurations (alternatives)
Sets the VIERA Link functions (Off / On)
●
VIERA Link functions become available when "VIERA Link" is set to
"On" (p. 48).
Sets to use Power on Link functions (Off / On) (p. 48)
Sets to use Power off Link functions (Off / On) (p. 48)
Controls the power consumption in Standby mode of the connected
equipment to reduce the power consumption (Off / On) (p. 48)
●
This function is available when "VIERA Link" is set to "On" and
"Power off Link" is set to "On".
Makes non-watched or non-used connected equipment go into
Standby mode to reduce the power consumption
(Off / On (With reminder) / On (No reminder)) (p. 48)
●
This function is available when "VIERA Link" is set to "On".
Resets all settings to the original condition (p. 34)
Downloads new software to TV (p. 35)
Displays the software licence information
Displays the system information of this TV
Sets the time the TV automatically goes to Standby mode when no
operation is performed for the selected times (Off / 2 hours / 4 hours)
●
Inserting the SD Card to the card slot does not affect this function.
●
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
●
The notification message will appear 3 minutes before going to
Standby mode.
Reduces brightness of picture to economise on power consumption
(Off / On)
Selects the screen area for displaying the image (Off / On)
On: Enlarges the image to hide the edge of the image
Off: Displays the image in the original size
●
Set to "On" if noise is generated on the edges of the screen.
●
This function is available when aspect is set to "16:9".
●
This function can be memorized separately for SD (Standard
Definition) and HD (High Definition) signals.
Selects the region where you live to adjust the standard time
(NSW / ACT / Victoria / Queensland / South Australia / Western
Australia / Northern Territory / Tasmania) (p. 15)
Select time offset from the standard time for Summer Time
(Auto / Off / +1/2 hour / +1 hour) (p. 15)
●
Set to "Auto" normally.
Changes the black level in the image for HDMI input mode with DVI
input signal manually (Normal / Full)
●
When the DVI input signal from the external equipment, especially
from PC, is displayed, the black level may not be suitable. In this
case, select "Full".
●
The black level for HDMI input signal will be adjusted automatically.
27
6/1/2010 10:58:03 AM 6/1/2010 10:58:03 AM