Child Lock - LG WD-3245RHD Owner's Manual

H ow to use washer
Wash/Rinse Temperature.
• Press TEMP. to cycle through the
temperature choices.
• Select a water temperature based on
the type of load you are washing. Use
the warmest water safe for fabrics.
Follow garment label instructions.
• Warm rinses leave the loads dryer than cold rinses. Warm
rinses increase wrinkling. In cold climates, a warm rinse
makes the load mere comfortable to handle. Cold rinses
save energy.
• Warm rinses are regulated at approximately 75˚ F (24˚ C).
This is a cooler warm rinse than you are used to, but it
saves energy and gives proper rinsing. The load is a
comfortable temperature remove from the washer.
1. Wash/Rinse Temperature
• Water temperature can be selected as below
according to the program.
- COTTON & QUICK
WARM/COLD U WARM/WARM U HOT/COLD U
COLD/COLD
- PERM PRESS & RINSE+SPIN
WARM/COLD U WARM/WARM U COLD/COLD
- WOOL & DELICATE
COLD/COLD U WARM/COLD
Selected temperature's lamp turns on.
For the more detailed information, please refer to the page12.
Temperature Guide
Wash Water Temperature
HOT
111˚ F (44˚ C) or above
WARM
90˚-110˚ F (32˚- 43˚ C)
COLD
70˚-90˚ F (21˚-32˚ C)
In wash water temperatures colder than 70˚ F (21˚ C),
detergents do not dissolve well. Soils may be difficult to
remove.
16
HOT/COLD
WARM/WARM
WARM/COLD
COLD/COLD
TEMP.
Suggested Fabrics
Whites and pastels
Heavy and greasy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils

Child Lock

TEMP.
If you want to lock all the buttons to prevent
operation by a child or unauthorized
persons, this function can be used.
1. Child Lock
• Child Lock can be set by pressing and holding
the TEMP. button and TIME DELAY button
simultaneously.
TIME
TEMP.
DELAY
• When child lock is set, all buttons are inoperable.
• To deactivate Child lock system, press and hold
TEMP. and TIME DELAY button simultaneously
again.
TIME
TEMP.
DELAY
• If you want to change the program when Child
Lock is active,
1. Press and hold both TEMP. and TIME DELAY
together.
2. Press the START/PAUSE button.
3. Change the desired program and press the
START/PAUSE button.
START
TIME
TEMP.
DELAY
PAUSE
• The child lock can be set at any time and it is
automatically canceled when operational errors
occur. Also Child Lock works when power is off.
TIME
DELAY
START
Change
the desired
PAUSE
program