EuroLite LED PMB-4 COB RGB 30W Bar User Manual
Hide thumbs Also See for LED PMB-4 COB RGB 30W Bar:

Advertisement

USER MANUAL
LED PMB-4 COB
RGB 30W Bar
Für weiteren Gebrauch aufbewahren!
©
Copyright
Keep this manual for future needs!
Nachdruck verboten!
Reproduction prohibited!

Advertisement

Table of Contents
loading

Summary of Contents for EuroLite LED PMB-4 COB RGB 30W Bar

  • Page 1 USER MANUAL LED PMB-4 COB RGB 30W Bar Für weiteren Gebrauch aufbewahren! © Copyright Keep this manual for future needs! Nachdruck verboten! Reproduction prohibited!
  • Page 2: Safety Instructions

    - download the latest version of the user manual from the Internet INTRODUCTION Thank you for having chosen a EUROLITE LED PMB-4 COB RGB 30W Bar. If you follow the instructions given in this manual, we are sure that you will enjoy this device for a long period of time.
  • Page 3: Health Hazard

    Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C connection cable or on the casing, do not take the device into operation and immediately consult your local dealer. This device falls under protection-class I. The power plug must only be plugged into a protection class I outlet.
  • Page 4: Operating Determinations

    OPERATING DETERMINATIONS This device is a lighting effect for creating decorative effects. This product is only allowed to be operated with an alternating voltage of 230 V, 50 Hz and was designed for indoor use only. This device is designed for professional use, e.g. on stages, in discotheques, theatres etc. Lighting effects are not designed for permanent operation.
  • Page 5: Description Of The Device

    7. DMX IN, 3-pin 8. DMX OUT, 3-pin 9. DMX IN, 5-pin 10. DMX OUT, 5-pin INSTALLATION The LED PMB-4 COB RGB 30W Bar can be installed on the ground or on the wall or ceiling. 19/27 00068870.DOC, Version 1.0...
  • Page 6: Danger Of Fire

    Overhead rigging DANGER TO LIFE! Please consider the EN 60598-2-17and the respective national standards during the installation! The installation must only be carried out by an authorized dealer! The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation.
  • Page 7 Please note: for overhead rigging in public or industrial areas, a series of safety instructions have to be followed that this manual can only give in part. The operator must therefore inform himself on the current safety instructions and consider them. The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety precautions! Pull the safety bond through the attachment eyelet and over the trussing system or a safe fixation spot.
  • Page 8 Occupation of the XLR-connection: If you are using controllers with this occupation, you can connect the DMX-output of the controller directly with the DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other XLR-outputs, you need to use adapter-cables. Building a serial DMX-chain: Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture.
  • Page 9: Operation

    A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With the LED PMB-4 COB RGB 30W Bar, you can select up to 13 different chasers plus solid colors. Selecting a chaser Press the MODE button to select the internal program mode.
  • Page 10: Dmx Mode

    Please press the ENTER button again to confirm and to select a DMX Channel Mode. Controlling: After having addressed the LED PMB-4 COB RGB 30W Bar, you may now start operating it via your lighting controller. Note: It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to ensure proper transmission on the DMX data link.
  • Page 11 DMX Channel Selection : Choosing a DMX Channel Mode up to 15 Channal Occupation After having set the desired addresses and pressed ENTER, you can now choose a DMX Channel Mode. (3 CH, 5 CH, 12 CH, 15CH). Set the desired mode via the UP or DOWN buttons. Press the ENTER button again to confirm and to exit the DMX Mode.
  • Page 12: Cleaning And Maintenance

    15-Channel mode : All 4 segments can be controlled with one another CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 15 0 - 15 Dimmer 16 - 23 (0-255) (0-255) (0-255) (0-255) 24 – 31 32 –...
  • Page 13: Technical Specifications

    150 x 440 x 165 mm Weight: 4.6 kg Accessories: No.: EUROLITE TPC-10 Coupler, black 59006858 EUROLITE DMX LED Operator 1 70064501 Saveking Safety bond 3x600 black 58010252 EUROLITE DMX LED Operator 4 70064504 EUROLITE DMX LED Operator IR2DMX 70064511...

Table of Contents