Auto Ch Memory; Skipping Stored Channel; Clear All; Display The Channel Information - Sharp Aquos LC-19SB280UT Operation Manual

Watching TV
3 Press EXIT to return to the normal screen.
When the TV receives an analog signal, the analog
information will appear.
Setting MTS/SAP .stereo
mode
t . ••.•.
• Channel label (if preset)
• Signal type
• Audio information (Stereo, SAP or Mono)
• Resolution
• Channel number
• V-Chip rating
• Sleep timer
• Picture size
The TV has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi-channel Television Sound (MTS).
The TV with MTS can receive mono sound, stereo
sound and Secondary Audio Programs (SAP). The
SAP feature allows a TV station to broadcast other
information, which could be audio in another language
or something completely different like weather
information.
You can enjoy Hi-Fi stereo sound or
SAP
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
Display the· channel informJltion
.. ~"'.
. _;. T . ' • -c. - - .
Press DISPLAY to display the current channel (or
input source) information on the screen.
When the TV receives a digital signal, the digital information
will appear for a few seconds.
• Channel number • Station name
• Channel label (if preset) • Broadcast program name
• V-Chip rating • Signal type
• Sleep timer • Audio language
• Program guide • Picture size
• Resolution
R!m
• MTS only operates while in TV mode.
• MTS is available only when receiving analog broadcasting,
not when receiving digital broadcasting.
• When the TV receives a stereo or SAP broadcast, the
word "Stereo" or "SAP" displays on-screen if you press
DISPLAY.
Changing MTS
You can change MTS as shown below to match the
television broadcast signal.
1 In analog TV mode, press AUDIO and the "Audio"
menu screen displays. "MTS" will be highlighted.
2 Press AUDIO again or
~/~
to select "Stereo",
"SAP" or "Mono".
Clear All
Auto
Ct1~emory~
Auto Ch Memory makes the TV look for all channels
viewable in the set area.
1
Press MENU and the MENU screen displays.
2
Press
I../?
to select "Channel", then press
~
or ENTER.
Press
I../?
to select "Auto Ch Memory", then press
~
or
ENTER.
3
Press
I../?
to select "Signal Type", then press
-4/~
to
select "Cable" or "Air".
4
Press
I../?
to select "Automatic Search", then press
~
or
ENTER.
S
The TV will begin memorizing all the channels available
in your area.
• It may take from 15 minutes to 30 minutes to complete
memorizing digital cable channels.
Depending on the reception condition, a bar display
may not advance for several minutes, please be
patient.
R!m
• Memorizing channels is best accomplished during evening
"PRIMETIME" hours, as more stations are broadcasting
digital signals. Memorizing channels can only be
accomplished while a station is broadcasting a digital
signal to set that channel into memory.
• New digital channels may be added to your area
periodically, it is recommended to perform the "Automatic
Search" procedure regularly.
All channels are deleted from the channel memory.
1
Press MENU and the MENU screen displays.
2
Press
I../T
to select "Channel", then press
~
or ENTER.
3
Press
I../?
to select "Add/Delete", then press
~
or
ENTER.
4
Press
I../T
to select "Clear All", then press
~
or ENTER.
S
Press EXIT to return to the normal screen.
Skipping stored channel
You can set channel selection disabled using
CH
+/- on
the remote control.
1
Press MENU and the MENU screen displays.
2
Press
I../T
to select "Channel", then press
~
or ENTER.
3
Press
I../T
to select "Add/Delete", then press
~
or
ENTER.
4
Press
I../T
to select "Add/Delete", then press
~
or
ENTER.
S
Press
I../T
to select the channel that you want to skip.
6
Press
-4/~
to select "Delete" for selected channel.
7
Press EXIT to return to the normal screen.
R!m
• To add a digital channel you are watching:
Select a channel you want to add. Then select "Adding
Channel" in step
4,
press
~ or
ENTER.
• To release the skipping channel:
Select "Add" in step 6.
@-19