Lock Key Missing Message Box; Slt And Dect - LG LDK SYSTEM Installation And User Manual

'ez Phone'

3.5 Lock Key Missing Message Box

1. If there is no lock key for ''ez Phone'', you will meet the below message box.
2. If you meet this message box, please contact the local dealer for 'ez Phone' lock
key

3.6 SLT and DECT.

There is "MON" button for SLT and DECT.
ACNR is not valid for SLT and DECT
If you want to make call with SLT, you should lift its receiver.
If you want to answer an incoming call with SLT, you should lift its receiver.
DECT has "TALK" button instead of "MON" button. Both are very similar. But if you want to
hang up a call with DECT, you should press "TALK" button on your dect terminal.
Flex button assignment is not valid for SLT and DECT
ACNR is not valid for SLT and DECT.
DECT ez Phone send some messages to DECT terminal. And DECT terminal will be given the
message and do operation correctly what ez Phone sent. But DECT terminal could not display
correct state automatically. So if you want to see correct state( like DND, FWD and so on), you
need to refresh DECT terminal by your hand. But ez Phone state is always correct. After
making call and answering call, the DECT terminal shows you correct state automatically.
If system does not give some feature for SLT and DECT, ez Phone does same for them.
67
Issue 1.0A