Cooking By Time; Cook 'N Watch - Whirlpool VM11D-8P Care And Use

Cooking by Time
Time Cook 1 & 2 allows you to Step 5: When time is up, the oven Step 9: When time is up, the oven
microwave for a preset amount signals and flashes "End." Oven, signals and flashes "End." The
of time using automatic power light and fan shut off. oven, light and fan shut off.
level 10 (High), or change power Step 6: Open the door. Step 10: Open the door.
level automatically.
Power level 10 (High) is
Using the Time Cook 2 Cook 'N Watch
recommended for most cooking,
but you may change this for more Feature The Cook 'N Watch feature is a
flexibility. See the cookbook. The Time Cook 2 feature lets you short-term cooking program which
To become better acquainted with set two time cooking functions automatically turns the oven off
time cooking, make a cup of coffee within one program. This is ideal if after 3 minutes. It's ideal for
by following the steps below, you want to change power levels melting cheese on food or other
during your cooking operations, quick cooking operations where
___ Here's how to do it. you want to stop cooking at just
Step 1: Place food in oven in the right time.
microwave-safe container and To Use Cook 'N Watch
close the door.
Cook'N
Watch
Step 1: Fill a cup 2/3 full of water,
add 1 teaspoon of instant coffee Step 1: Touch COOK 'N WATCH.
and stir to dissolve. Use a cup that Step 2: Touch TIME COOK 1 & 2. After 4 seconds, "START" flashes
has no metal decoration and is Step 3: Select your first cook time. on display.
microwave-safe (refer to For example, touch 2, 1 and 5 for Step 2: Touch START pad.
Microwaving Tips section). Place
cup in oven and close door. two minutes and 15 seconds. "COOK 'N WATCH" and time,
Step 4: Touch TIME COOK 1 & 2. counting up to 3 minutes, are
Step 5: Set your second cook time. displayed. Power level 10 is
automatically set in oven but
another power level can be selected
How to Change Power Level either during programming or
After setting cooking time, during cooking.
touch POWER LEVEL pad,
Step 2: Touch TIME COOK 1 & 2. then touch desired number for
OFF
RESET
Step 3: Select your time. Touch 1, new power level.
0 and 0 for one minute.
Because automatic power level 10 Step 6: Touch START.
is recommended for this cup of Step 7: "POWER 10" is displayed
coffee, there is no need to change and "COOK TIME I" counts down. Step 3: Open the door or touch the
the power level. (If power level 10 Step 8: At the end of "COOK OFF/RESET pad to stop cooking.
is not appropriate, see "How to TIME I," the second power level is The oven will automatically signal,
Change Power Level" at right.) displayed and "COOK TIME II" is flash "End" and shut off at the end
of 3 minutes.
Step 4: Touch START pad. shown counting down.
10